Hi you have to do the following 1. first connect to the ARM and run the gel script on it This will release DSP from reset 2. connect to the DSP Good luck Albert
On 7/24/08, SergA <[EMAIL PROTECTED]> wrote: > > Hi All. > > Need help. > I try to connect to my boards 6446 and 6467 throw JTAG XDS510PP+. > While I try it with DSP it is ok. > But when I try connect to ARM, CCS says: > Error connecting to the target: > Error 0x80002200/-140 > Fatal Error during: OCS, Control, > Error generated by SD scan controller module > > > > When I try connect to ARM of evmDM6467 the CCS says: > Error connecting to the target: > Error 0x80002200/-140 > Fatal Error during: OCS, Control, > Error generated by SD scan controller module > > Error: > Error 0xA0002020/-1044 > Error during: Execution, Control, > Device driver: Cannot acquire emulator process > Possible conflict for device driver usage > > > What I do wrong??? > > _______________________________________________ > Davinci-linux-open-source mailing list > [email protected] > http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source > -- Albert Burbea Harishonim 8 Ramat Gan 52502, Israel Tel/Fax + 972-3-7526016 Mobile: +972-52-3541842
_______________________________________________ Davinci-linux-open-source mailing list [email protected] http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
