There is no /sys/class/davinci_display [EMAIL PROTECTED]:/work# ls /sys/class/ DavinciHD_vdce i2c-adapter mem net sound usb_host cir i2c-dev misc scsi_device tty vc cmem input mtd scsi_host usb video4linux
Is this necessary to have /sys/class/davinci_display? Thanks for reply. On Mon, 2008-08-11 at 17:14 +0530, Jadav, Brijesh R wrote: > Hi, > > > > Can you try getting the mode set on the Output after running the > application? > > > > You can get the current mode by following command. > > > > cat /sys/class/davinci_display/ch0/mode > > > > Thanks, > > Brijesh Jadav > > > > -----Original Message----- > From: davinci-linux-open-source-bounces > [EMAIL PROTECTED] > [mailto:davinci-linux-open-source-bounces > [EMAIL PROTECTED] On Behalf Of SergA > Sent: Monday, August 11, 2008 5:06 PM > To: [email protected] > Subject: HD display on DM6467 evm > > > > Hi. > > > > I try to test capture and display on DM6467 evm. I use saMmapLoopback > > and saUserPtrLoopback tests. > > If I connect to capture composite SD resolution in, and also composite > > out to display: its work fine. > > Then I connect in component 720p signal. Test is going, but there is > > nothing (my hdtv tell that there is no input signal) on component out. > > Also I dump captured frames, and this ok, there is stream that I give > in > > evm. > > What is wrong? > > Best regards. Anton Sergeev > > > > _______________________________________________ > > Davinci-linux-open-source mailing list > > [email protected] > > http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source > > _______________________________________________ Davinci-linux-open-source mailing list [email protected] http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
