Hi Renjith, We decided to stick with the DM6446 since the DM6467 is more expensive and the PCI feature is broken for our application. I would suspect, however, that you would be able to interface the two DM6467s over PCI, but it is probably better to share video over the built-in ports instead.
Sorry I can't be of more help. Ryan -----Original Message----- From: renjith [mailto:[EMAIL PROTECTED] Sent: Monday, August 11, 2008 8:17 AM To: Ryan Talbot Subject: Reg : PCI master support of DM6467. Hi Ryan, >From the Davinci-Forum, I find that you are also in a similar project and so this Email. I am wishing for a similar design, by Using 6467 as a Master PCI device and Another 6467 as the Slave in PCI bus. Do you think such a Situation is feasible, so that both the DM6467 can communicate Each other and share video Data (Only One Side data flow), from your experience ? Have you got any of the drivers in making the DM6467 master PCI mode, Did you succeed in that ? Now I am afraid , as I get less response from forum. If you could give some light on this, from your experience , I am great-ful. Thanks N' Regards, Renjith. _______________________________________________ Davinci-linux-open-source mailing list [email protected] http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
