Normally in the DaVinci driver the ECC is handled in hardware, but I think that will only work for 8-bit mode.If you have to do it in software the performance advantage might be negative.
Kind regards, Arie de Muijnck ________________________________ From: Tom Briggs We are interested in improving the performance of our NAND reads by using two 8-bit banks of NAND chips and using EMIFA in 16-bit addressing mode. Has anyone done this, or know of any problems this may have, specifically using UBoot and/or Linux? -tom -------------------------------------------------------- CONFIDENTIALITY NOTICE - This e-mail transmission, and any documents, files or previous e-mail messages attached to it may contain information that is confidential or legally privileged. If you are not the intended recipient, or a person responsible for delivering it to the intended recipient, you are hereby notified that you must not read this transmission and that any disclosure, copying, printing, distribution or use of any of the information contained in or attached to this transmission is STRICTLY PROHIBITED. If you have received this transmission in error, please immediately notify Arie de Muijnck by telephone or [EMAIL PROTECTED] and delete the original transmission and its attachments without reading or saving in any manner.
_______________________________________________ Davinci-linux-open-source mailing list [email protected] http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
