Hi, Prabhaharan R-TLS,Chennai spiffera, alle Thursday 06 November 2008 circa: > We have used printk in all the driver functions and the tvp5150 related > changes in the code is getting called properly. We have registered the > VDINT0 interrupt in the vpfe code. But, the vpfe_isr is not getting > called. It is registering properly and not getting failed. [...] > We don't know the reason for this. Is there any other setting required > in the VPFE side for 8-bit BT 656 embedded sync other than mentioned in > the hardware programming details of the VPFE CCDC part?
I'm getting the same behavior (not receiving VDINT[01] irqs), with different hardware, while the whole process under uboot works fine. I think we probably had the same problem, and I start thinking that it's connected to the fact that we don't use ipipe. let me know of some progress, please :) Regards. -- Andrea Gasparini ---- ImaVis S.r.l. ---- web: www.imavis.com _______________________________________________ Davinci-linux-open-source mailing list [email protected] http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
