er.. have the dsp output a black image (10801080 every 32 bit) and check on the digital lines is you get something different. Seems like crosstalk to me, but I may be wrong. Is the VCLK clock connected properly? Albert
2008/11/18 Prabhaharan R-TLS,Chennai <[EMAIL PROTECTED]> > Hello All, > > > > I am facing an issue in the video encoder (VPBE) output. I have programmed > the VPBE to output both the analog and digital signal (BT 656). I am getting > both the output. Only issue that I am facing is, there are unwanted lines > which are running over the display. It's appearing both for the analog and > digital output. If I set the VIDCTL VCLK Enable (VCLKE), I am facing this > issue. If I did not set this, I am getting the proper display in the analog > output. But, the digital output will not work, because the VCLK is not > enabled. > > > > I am setting the SYS_VPSS_CLKCTL as 0x18, the VENC_DCLKCTL as 0x0800 and > the VENC_DCLKPTN0 as 0x01. > > > > Does anyone face the similar issue? Is this issue could be due to software > register settings/hardware issue? > > > > Thanks a lot in advance. > > > > Regards, > > Prabhaharan.R > DISCLAIMER: > > ----------------------------------------------------------------------------------------------------------------------- > > The contents of this e-mail and any attachment(s) are confidential and > intended for the named recipient(s) only. > It shall not attach any liability on the originator or HCL or its > affiliates. Any views or opinions presented in > this email are solely those of the author and may not necessarily reflect > the opinions of HCL or its affiliates. > Any form of reproduction, dissemination, copying, disclosure, modification, > distribution and / or publication of > this message without the prior written consent of the author of this e-mail > is strictly prohibited. If you have > received this email in error please delete it and notify the sender > immediately. Before opening any mail and > attachments please check them for viruses and defect. > > > ----------------------------------------------------------------------------------------------------------------------- > > _______________________________________________ > Davinci-linux-open-source mailing list > [email protected] > http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source > > -- Albert Burbea Harishonim 8 Ramat Gan 52502, Israel Tel/Fax + 972-3-7526016 Mobile: +972-52-3541842
_______________________________________________ Davinci-linux-open-source mailing list [email protected] http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
