Hello, Please go through the user guide of the DVSDK. You can get them from the TI website also. The following site also provides some information (http://www.linuxdriver.co.il/davinci) http://focus.ti.com/dsp/docs/dspplatformscontenttp.tsp?sectionId=2&familyId=1300&tabId=1854
If you have registered your board, you can access the documents from TI site also. This should help you to start off. Your questions will be answered by many of these documents. With best regards, Venkatachala Upadhya| Extn: 65395| -- -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of [email protected] Sent: 22 December, 2008 8:06 PM To: [email protected] Subject: DVSDK Usage problem Hi All, I am trying to use the DVSDK v1.30. What things do I need on the DSP Side. Do I need to download the DSP/BIOS explicitly? Or does the decode application downloads the same for me? In case I need to download the DSP/BIOS, then how can I download the same and what are the necessary utils to use the same? Is there any good document for the same? I don't have an IR remote, so would be using the dvsdk application from command line. Is there any requirement for using it from command line? Please Help... Regards, Suhas Jain _______________________________________________ Davinci-linux-open-source mailing list [email protected] http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source http://www.mindtree.com/email/disclaimer.html _______________________________________________ Davinci-linux-open-source mailing list [email protected] http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
