BT656 by definition is NTSC/PAL resolution. Are you expecting the full
sensor resolution? If so the only way to do that is to capture in bayer
format and convert.
Steve
Goung wrote:
> Hi, Sundar
> Thanks your reply quickly.
> The MT9M131 is configured to 8-bit bt.656 mode output to ccdc of VPFE,
> but the MT9T001 CMOS camera is only for raw data mode, and doesn't
> support bt.656 format.
>
> I think i would trace the MT9T001 CMOS camera driver to find out
> different of communicated to VPFE between TVP5146 and MT9T001 .
>
> Thanks again.
>
> 2008/12/25, sunder ramani <[email protected]
> <mailto:[email protected]>>:
>
> Hi,
>
> The settings for TVP5146 are for interlaced and embedded sync
> format. Please check with your camera module as to what kinda
> output it is supposed to give. For a reference, you can follow the
> MT9T001 CMOS camera client driver to rewrite your driver. This
> will be more closer and similar to what you are trying to achieve.
>
> Cheers!
> Sundar
>
>
>
>
> --
> Best Regards,
> Goung.
> ------------------------------------------------------------------------
>
> _______________________________________________
> Davinci-linux-open-source mailing list
> [email protected]
> http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
>
_______________________________________________
Davinci-linux-open-source mailing list
[email protected]
http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
