Hi everybody. I used LSP 2.0.0 and MontaVista 5.0 from the link had posted here. Everything worked fine with them.
But this two CDs (SPRC592A and SPRC597C) are a mess. I couldn´t fount the ramdisk.gz file. In the MV 5.0/LSP 2.0.0 the process to get it was immediately. Thank very much to everybody for all the help. On Mon, Mar 16, 2009 at 6:53 AM, Artur Gromek <[email protected]>wrote: > Hi Marcelo, > I use NFS, so I can't help U with that. > Rgds, > -- > Artur > > Marcelo Guedes Silva pisze: > >> One more thing: do someone has the ramdisk.gz file to send to me? I >> couldn´t found it in this place and anywhere else. The directory images >> doesn´t exist. >> >> /opt/montavista/pro/devkid/arm/v5t_le/images/ramdisk.gz >> >> >> http://linux.omap.com/pipermail/davinci-linux-open-source/2008-November/009118.html >> >> On Fri, Mar 13, 2009 at 2:44 PM, Artur Gromek >> <[email protected]<mailto: >> [email protected]>> wrote: >> >> Marcelo, >> I've never tried to recompile kernel for dm6467, didn't have to ! >> But I'll tell U what, better get used to it ;) >> -- Artur Gromek, <[email protected] >> <mailto:[email protected]>> >> VisionaryDSP Inc, <www.visionarydsp.com <http://www.visionarydsp.com>> >> >> >> Marcelo Guedes Silva pisze: >> >> Why? Please, someone say to me, why have I two source kernels in >> one cd to dm646x: one kernel has support to dm646x and the other >> _/*not*/_? >> >> More than it: why the damn quickstart told me to use the >> /*wrong*/ path!??? This version didn't support dm646x! And of >> course, it doesn´t have the davinci_dm646x_defconfig file!! >> >> Paths and Names >> The following paths and names are used for this LSP: >> LSP name: ti-davinci_evm >> LSP installation path: >> /*/opt/montavista/pro/devkit/lsp/ti-davinci_evm-arm_v5t_le*/ >> Toolchain installation >> path:/opt/montavista/pro/devkit/arm/v5t_le/bin >> Default kernel image name: uImage-ti-davinci_evm >> Default kernel image path: >> /opt/montavista/pro/devkit/arm/v5t_le/target/boot >> Default RAM disk image: >> /opt/montavista/pro/devkit/arm/v5t_le/images/ramdisk.gz >> Boards tested: TI-Davinci_EVM Gamma >> Rebuild kernel command (NFS or RAM disk): make uImage >> Location of rebuilt kernel: arch/arm/boot/uImage >> >> The correct path is the other: >> //opt/montavista/pro/devkit/lsp/ti-davinci ./ >> >> I discovered it after this discussion and after had made a >> search in my whole file system for "davinci_dm646x_defconfig". >> All the other documents and how-tos just said to "go to lsp >> directory" or "going to the kernel path" and because the >> quickstart, I always tried to use ti-davinci_evm-arm_v5t_le . >> >> Gosh! Seen that someone just copy/paste the instructions and >> files to dm6446 into this CDs without take a look or test the >> process =/ And, more than it, this other source, why is it here >> in a support's CD to dm646x? >> Someone from Texas, please, correct it in the next installation CD. >> >> I lost one day because mistakes in the documentation and >> misinformation. >> >> Thanks for all the help here. >> >> On Fri, Mar 13, 2009 at 10:47 AM, Steve Chen <[email protected] >> <mailto:[email protected]> <mailto:[email protected] >> >> <mailto:[email protected]>>> wrote: >> >> On Fri, 2009-03-13 at 10:30 -0300, Marcelo Guedes Silva wrote: >> > >> > >> > I just done it. Same problem. One point that I forgot to >> mention is >> > that I´m using dm6467, not dm6446 and don´t exist a >> > davinci_dm646x_defconfig, only davinci_dm644x_defconfig. >> Did you >> > sometime compile it to dm6467? >> > >> > I´m using the files from the DVSDK CDs (SPRC592A and >> SPRC597C). Now I >> > ´m suspecting that it´s old and doesn´t support dm646x EVM >> (I guess >> > now that they put only a compiled version in the right >> way, but the >> > source files are old). >> > I saw that a linux version exists in >> > http://wiki.davincidsp.com/index.php?title=Linux_Toolchain >> with a lot >> > of patches to dm6467. I will try to use it. I´m >> downloading it now. >> >> Yeap, sound like you found the problem. If you don't see >> arch/arm/configs/davinci_dm6467_defconfig, then the kernel >> does not have >> dm6467 support. Also, there is a newer release at >> >> https://www-a.ti.com/downloads/sds_support/targetcontent/psp/mv_lsp_2_00/index.html >> >> May want to consider using it. >> >> Regards, >> Steve >> >> >> ------------------------------------------------------------------------ >> _______________________________________________ >> Davinci-linux-open-source mailing list >> [email protected] >> <mailto:[email protected]> >> >> http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source >> > > >
_______________________________________________ Davinci-linux-open-source mailing list [email protected] http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
