After moving to the git head, I'm having
some emac troubles. After, the "timed out!" there
is a long delay, and then everything works fine.
Does this look familiar to anyone?
Thanks
Troy
Sending DHCP requests .<6>PHY: 1:00 - Link is Up - 100/Full
..... timed out!
net eth0: EMAC: TX teardown aborted
IP-Config: Retrying forever (NFS root)...
eth0: attached PHY driver [LXT971] (mii_bus:phy_addr=1:00, id=1378e2)
Sending DHCP requests .<6>PHY: 1:00 - Link is Up - 100/Full
., OK
IP-Config: Got DHCP answer from 0.0.0.0, my address is 192.168.0.14
IP-Config: Complete:
device=eth0, addr=192.168.0.14, mask=255.255.255.0, gw=192.168.0.1,
host=192.168.0.14, domain=domain.actdsltmp, nis-domain=(none),
bootserver=0.0.0.0, rootserver=192.168.0.200, rootpath=
Looking up port of RPC 100003/2 on 192.168.0.200
Looking up port of RPC 100005/1 on 192.168.0.200
VFS: Mounted root (nfs filesystem) on device 0:13.
Freeing init memory: 136K
Warning: unable to open an initial console.
192.168.0.14 login:
_______________________________________________
Davinci-linux-open-source mailing list
[email protected]
http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
