Troy, There seems to be no issue at our end. There is no booting delay leading to time out. May be you can send me the uImage you are using, will try booting it and let you know the status.
Regards, Chaithrika ________________________________________ From: [email protected] [[email protected]] On Behalf Of Troy Kisky [[email protected]] Sent: Wednesday, March 25, 2009 9:03 AM To: davinci-linux-open-source Subject: emac troubles After moving to the git head, I'm having some emac troubles. After, the "timed out!" there is a long delay, and then everything works fine. Does this look familiar to anyone? Thanks Troy Sending DHCP requests .<6>PHY: 1:00 - Link is Up - 100/Full ..... timed out! net eth0: EMAC: TX teardown aborted IP-Config: Retrying forever (NFS root)... eth0: attached PHY driver [LXT971] (mii_bus:phy_addr=1:00, id=1378e2) Sending DHCP requests .<6>PHY: 1:00 - Link is Up - 100/Full ., OK IP-Config: Got DHCP answer from 0.0.0.0, my address is 192.168.0.14 IP-Config: Complete: device=eth0, addr=192.168.0.14, mask=255.255.255.0, gw=192.168.0.1, host=192.168.0.14, domain=domain.actdsltmp, nis-domain=(none), bootserver=0.0.0.0, rootserver=192.168.0.200, rootpath= Looking up port of RPC 100003/2 on 192.168.0.200 Looking up port of RPC 100005/1 on 192.168.0.200 VFS: Mounted root (nfs filesystem) on device 0:13. Freeing init memory: 136K Warning: unable to open an initial console. 192.168.0.14 login: _______________________________________________ Davinci-linux-open-source mailing list [email protected] http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source_______________________________________________ Davinci-linux-open-source mailing list [email protected] http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
