Neeraj,
The latest U_boot does not have support for DM6467.
You are compiling for the DVEVM. This is meant for DM6446. Compiling for DM6446
and using it for DM6467 EVM will not work.
Withing TI we have got U-Boot working on 1.3.4. Maybe you can use that.
I will add support for DM6467 in U-Boot GIT later this month
Thanks,
Sandeep
________________________________________
From: [email protected]
[[email protected]] On Behalf Of Neeraj
Tandon [[email protected]]
Sent: Saturday, April 04, 2009 1:38 PM
To: [email protected]
Subject: DM6467 EVM u-boot Nand flash issue
Hi,
I posted in this in u-boot list. Since this is more specific to Davinci I am
posting here. If anyone has used recent version of u-boot for DM6467 and
managed to boot from NAND flash then let me know. Following is the issue I am
facing with U-boot.
I am using u-boot version 2009.3 for TI Davinci DM6467 EVM. The reason to use
this was support of usb related commands for DM6467 in this tree.
I built the u-boot.bin for NAND flash. My only modification was in file
include/configs/davinci_devevm.h where I #define CONFIG_SYS_USE_NAND
I built this and flashed this using TI provide sfh_DM6467.exe. The flashng goes
well and I see blocks 6 and 7 being written. However on power on of EVM I see
following:
Chip initialization passed!
TI UBL Version: 1.30
Booting Catalog Boot Loader
BootMode = NAND
Starting NAND Copy...
Valid MagicNum found.
DONE
Jumping to entry point at 0x81080000
This keeps repeating and EVM it is unable to boot.
Any one used this version of u-boot with a NAND flash and TI DVEVM. Any
suggestion on changes I should make to isolate this error ?
Regards,
Neeraj
_______________________________________________
Davinci-linux-open-source mailing list
[email protected]
http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
_______________________________________________
Davinci-linux-open-source mailing list
[email protected]
http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
