Hi all, I want to port android on davinci board.
But as per android specifications we need to have a linux version >= 2.6.25. Does android ported on davinci ? I would also like to know the latest linux version that has been relased on davinci. Regards, Kumar -----Original Message----- From: [email protected] [mailto:[email protected]]on Behalf Of Sidharth Garde Sent: Monday, April 06, 2009 12:32 PM To: Paulraj, Sandeep; Neeraj Tandon; [email protected] Subject: Re: DM6467 EVM u-boot Nand flash issue Dear All, I am also working on a DM6467 proceesor. Can you please tell me where I can find U-Boot 1.3.4 and u-boot version 2009.3 for downloading? Thanks, Sidharth ----- Original Message ----- From: "Paulraj, Sandeep" <[email protected]> To: "Neeraj Tandon" <[email protected]>; <[email protected]> Sent: Sunday, April 05, 2009 5:50 AM Subject: RE: DM6467 EVM u-boot Nand flash issue Neeraj, The latest U_boot does not have support for DM6467. You are compiling for the DVEVM. This is meant for DM6446. Compiling for DM6446 and using it for DM6467 EVM will not work. Withing TI we have got U-Boot working on 1.3.4. Maybe you can use that. I will add support for DM6467 in U-Boot GIT later this month Thanks, Sandeep ________________________________________ From: [email protected] [[email protected]] On Behalf Of Neeraj Tandon [[email protected]] Sent: Saturday, April 04, 2009 1:38 PM To: [email protected] Subject: DM6467 EVM u-boot Nand flash issue Hi, I posted in this in u-boot list. Since this is more specific to Davinci I am posting here. If anyone has used recent version of u-boot for DM6467 and managed to boot from NAND flash then let me know. Following is the issue I am facing with U-boot. I am using u-boot version 2009.3 for TI Davinci DM6467 EVM. The reason to use this was support of usb related commands for DM6467 in this tree. I built the u-boot.bin for NAND flash. My only modification was in file include/configs/davinci_devevm.h where I #define CONFIG_SYS_USE_NAND I built this and flashed this using TI provide sfh_DM6467.exe. The flashng goes well and I see blocks 6 and 7 being written. However on power on of EVM I see following: Chip initialization passed! TI UBL Version: 1.30 Booting Catalog Boot Loader BootMode = NAND Starting NAND Copy... Valid MagicNum found. DONE Jumping to entry point at 0x81080000 This keeps repeating and EVM it is unable to boot. Any one used this version of u-boot with a NAND flash and TI DVEVM. Any suggestion on changes I should make to isolate this error ? Regards, Neeraj _______________________________________________ Davinci-linux-open-source mailing list [email protected] http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source _______________________________________________ Davinci-linux-open-source mailing list [email protected] http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source _______________________________________________ Davinci-linux-open-source mailing list [email protected] http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source The information contained in this electronic message and any attachments to this message are intended for the exclusive use of the addressee(s) and may contain proprietary, confidential or privileged information. If you are not the intended recipient, you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately and destroy all copies of this message and any attachments contained in it. _______________________________________________ Davinci-linux-open-source mailing list [email protected] http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
