Kevin,

We had figured that was the issue with the clock being disabled.
>then your driver has a bug in that it is not properly requesting clocks

I see vpss master, vpss slave and vpss dac clocks defined. Now vpss clock is 
required for all the vpss modules (capture, display, h3a etc). In VPSS we have 
registers for enabling clocks for each module, but the above clock is 
applicable for more than one driver. How does driver request clock in this case?

I believe this should be enabled from the evm board setup. Right now I have set 
the flag to ALWAYS_ENABLED. Hope this is fine.

Murali Karicheri
Software Design Engineer
Texas Instruments Inc.
Germantown, MD 20874
Phone : 301-515-3736
email: [email protected]

>-----Original Message-----
>From: Kevin Hilman [mailto:[email protected]]
>Sent: Wednesday, May 13, 2009 5:35 PM
>To: Karicheri, Muralidharan
>Cc: [email protected]
>Subject: Re: DM355 - No vpss register write happens in the latest kernel
>
>"Karicheri, Muralidharan" <[email protected]> writes:
>
>
>> I have ported the video driver to the latest davinci git kernel and
>> I have built a single uImage for DM355 and DM6446. The driver works
>> fine on DM6446, but doesn't work on DM355. When I dumped the
>> registers, none of them were being written. I tried writing manually
>> using writel application and still I can't see the values in the
>> registers. The architecture code has changed recently quite a lot. I
>> have a version of the kernel that downloaded in March and this issue
>> was not seen there. This is blocking my driver work and any help
>> will be appreciated.
>
>My first guess would be that your driver doesn't enable all the
>relevant clocks for VPSS?
>
>You could try without the CONFIG_DAVINCI_RESET_CLOCKS=y in
>the config.
>
>If it works with that option disabled, then your driver has a bug in
>that it is not properly requesting clocks.
>
>Kevin
>

_______________________________________________
Davinci-linux-open-source mailing list
[email protected]
http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source

Reply via email to