I have to rely on 2.6.10 kernel from MV at this moment, due to some driver issue. The number of errors that I got from the first time I reboot and until to the recent one, seems never incremented even I write/delete files on it. Meaning, there's a stability now compare on my previous test.
I am using udev for the dynamic creation of my device node and when I reboot it, I saw a failure that cannot be unmounted the /dev. Do you think udev causing some problem too? Thanks, -john On Tue, May 19, 2009 at 10:12 PM, David Brownell <[email protected]> wrote: > On Tuesday 19 May 2009, John Tobias wrote: >> I am using Montavista kernel 2.6.10. > > And I've certainly seen JFFS2 issues with older code. > Often enough that I stopped using it ... until I was > quite pleased to be able to start relying on it with > some NOR and DataFlash chips starting in 2.6.20-ish > series kernels. > > Does the code in mainline still fail for you? > > - Dave > > >> On Tue, May 19, 2009 at 3:52 PM, David Brownell <[email protected]> wrote: >> > On Tuesday 19 May 2009, John Tobias wrote: >> >> I have tested two scenarios for writing/reading a data on my nand >> >> flash and it act's differently the nand driver on DM6446. >> > >> > You say which OS version you're using, since there are >> > many versions of "the" nand driver and many versions of >> > "JFFS2". >> > >> > Are you seeing these with the DM6446 EVM and 2.6.30-rc6? >> > If not, do these problems reproduce there? >> > >> > >> >> > > > _______________________________________________ Davinci-linux-open-source mailing list [email protected] http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
