Ben White wrote:
Hi Folks,
We have a video encoder product that is based on DM6446. GIT kernel
2.6.23-davinci1 and DVSDK 1.30.01.41.
We have some automated test tools that repeatedly change the codecs
from H.264->MJPEG->MPEG4-> etc (these simulate user actions). This
results in the whole of CE being torn down and re-setup during each
codec switch. There’s also a heap of other stuff happening on the ARM
at this point.
Anyway, the problem is that after about 30mins – 1hour of running the
automated test, the board reboots. There are no error messages,
nothing strange, memory usage looks OK. The watchdog is disabled.
So my question, is how to go about debugging this. My current attack
plan is just to start disabling stuff until the problem goes away and
then gradually bring back things to isolate the problem. But, there
should surely be a quicker way?
Cheers,
Ben
Might be worth investigating heat.
_______________________________________________
Davinci-linux-open-source mailing list
[email protected]
http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
