Hello Swaminathan,

Thank you for you help.

Unfortunately arago-git brought as much as the same result:

r...@dm6446-evm:/# modprobe musb_hdrc
usbcore: registered new interface driver usbfs                                  
                                          
usbcore: registered new interface driver hub                                    
                                          
usbcore: registered new device driver usb                                       
                                          
musb_hdrc: version 6.0, cppi-dma, host, debug=0                                 
                                          
FATAL: Error inserting musb_hdrc 
(/lib/modules/2.6.32-rc2-davinci1/kernel/drivers/usb/musb/musb_hdrc.ko): No 
such device  
r...@dm6446-evm:/# lsmod                                                        
                                          
Module                  Size  Used by                                           
                                          
usbcore               108027  0                                                 
                                          
nop_usb_xceiv           1606  0                                                 
                                          
ipv6                  228907  10                                                
                                          
minix                  25382  0                                                 
                                          
r...@dm6446-evm:/#

David.

SS> David,
SS>         Could you try the aarago git davinci tree?

SS>         From the below log it seems there could be a
SS> configuration issue between the base port and the driver init.

SS> Regards
SS> swami

>> -----Original Message-----
>> From: davinci-linux-open-source-
>> [email protected] [mailto:davinci-linux-open-
>> [email protected]] On Behalf Of David
>> Goshadze
>> Sent: Wednesday, February 24, 2010 11:59 PM
>> To: [email protected]
>> Subject: 2.6.32 musb_hdrc fails to load (DM6446)
>> 
>> Hi all!
>> 
>> Please help with the following problem:
>> 
>> I successfully loaded an built 2.6.32 for our DM6446 based board.
>> 
>> Everything's just fine except I cannot load musb_hdrc driver.
>>  I got:
>>   modprobe musb_hdrc : version 6.0, cppi-dma, peripherial, debug=0
>>   FATAL: Error inserting musb_hdrc
>> (/lib/modules/2/6/32/kernel/drivers/usb/musb/musb_hdrc.ko): No such device
>>   nop_usb_xceiv loaded successfully.
>> 
>>   use_dma=n doesn't help.
>> 
>> Spending 2 days trying various kernel configurations and googling didn't
>> help.
>> 
>> With 2.6.10 (mvl) everything was fine.
>> 
>> I'm nearly gone mad with this.
>> 
>> David.
>> 
>> 
>> 
>> _______________________________________________
>> Davinci-linux-open-source mailing list
>> [email protected]
>> http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source



___________________________
David Goshadze,
Chief project developer,
PLC Digimeq,
5, Vozdvizhenka str.
Moscow, Russian Federation

Ph +7 495 9505231
Mob +7 916 604 56 93
Fax +7 495 9505231
[email protected]
www.digimeq.com

_______________________________________________
Davinci-linux-open-source mailing list
[email protected]
http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source

Reply via email to