David, Did you compile in the I2c Expander support in the kernel. I think you are missing this part of the config. Can you confirm.
regards swami ________________________________________ From: [email protected] [[email protected]] On Behalf Of David Goshadze [[email protected]] Sent: Saturday, February 27, 2010 6:05 PM To: [email protected] Subject: Re: 2.6.32 musb_hdrc fails to load (DM6446) Hi all again. Digging into sources I discovered that setup_usb (from arch/arm/mach-davinci/usb.c) is never called, thus platform device register for usb_dev is also never called. Wondering for a reason. Please help. David. SS> David, SS> Could you try the aarago git davinci tree? SS> From the below log it seems there could be a SS> configuration issue between the base port and the driver init. SS> Regards SS> swami >> -----Original Message----- >> From: davinci-linux-open-source- >> [email protected] [mailto:davinci-linux-open- >> [email protected]] On Behalf Of David >> Goshadze >> Sent: Wednesday, February 24, 2010 11:59 PM >> To: [email protected] >> Subject: 2.6.32 musb_hdrc fails to load (DM6446) >> >> Hi all! >> >> Please help with the following problem: >> >> I successfully loaded an built 2.6.32 for our DM6446 based board. >> >> Everything's just fine except I cannot load musb_hdrc driver. >> I got: >> modprobe musb_hdrc : version 6.0, cppi-dma, peripherial, debug=0 >> FATAL: Error inserting musb_hdrc >> (/lib/modules/2/6/32/kernel/drivers/usb/musb/musb_hdrc.ko): No such device >> nop_usb_xceiv loaded successfully. >> >> use_dma=n doesn't help. >> >> Spending 2 days trying various kernel configurations and googling didn't >> help. >> >> With 2.6.10 (mvl) everything was fine. >> >> I'm nearly gone mad with this. >> >> David. >> >> >> >> _______________________________________________ >> Davinci-linux-open-source mailing list >> [email protected] >> http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source ___________________________ David Goshadze, Chief project developer, PLC Digimeq, 5, Vozdvizhenka str. Moscow, Russian Federation Ph +7 495 9505231 Mob +7 916 604 56 93 Fax +7 495 9505231 [email protected] www.digimeq.com _______________________________________________ Davinci-linux-open-source mailing list [email protected] http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source _______________________________________________ Davinci-linux-open-source mailing list [email protected] http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
