Hello, After reconfiguring my evm6446 to file share from an NFS host, I am having trouble getting video into the board.
I want to revert to the default bootargs that ship with the board, but I can't find that info anywhere, and I've written over the NAND with new bootargs for the NFS mount. Does anybody know what the default bootarg string is? I am using this at the moment: setenv bootargs video=davincifb:vid0=0,2500K:vid1=0,2500K:osd0=720x576x16,2025K davinci_enc_mngr.ch0_output=COMPOSITE davinci_enc_mngr.ch0_mode=ntsc console=ttyS0,115200n8 noinitrd rw ip=off root=/dev/hda1 mem=118M But when I try to run the encode demo, I get the following error message: Encode demo started. Error: Failed to detect video standard, video input connected?6/data/videos/demo. Error: Failed to create video encoder: mpeg4enc And when I boot, I am getting the following messages: Davici AEW Driver cannot be loaded VIDEO PORT is not enabledData Flow path from CCDC is disabled Davinci AF driver cannot be loaded VIDEO PORT is not enabled CCDC needs to be configured<6>i2c /dev entries driver Can anybody help me??? Thank You, Chris Jackson _______________________________________________ Davinci-linux-open-source mailing list [email protected] http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
