thank you suhas, I am familiar with that document, and I've worked through it successfully.
But after changing the bootargs in section 4.3.7, and saveenv overwriting the original bootargs, I haven't been able to run the encode demo when booting from the NAND. I think the problem is where I have changed the video bootargs in 4.3.7, but I can't find anywhere the default. out of box settings that I can revert too. I should have saved that info before overwriting. I have successfully run the encode demo before setting up the board to NFS mount, and now I just want to do that again but I cant seem to get the board to take video input. any ideas??? I still get the following error msg when i run the encode demo from the command line: Encode demo started. Error: Failed to detect video standard, video input connected?6/data/videos/demo. Error: Failed to create video encoder: mpeg4enc thank you, Chris Jackson On Tue, 2010-05-04 at 12:16 +0530, Suhas Jain wrote: > Hi Chris, > > You can find the complete setup for DM6446 EVM board at following link. > > http://focus.ti.com/lit/ug/sprue66e/sprue66e.pdf > > Regards, > Suhas Jain > > -----Original Message----- > From: [email protected] > [mailto:[email protected]] On Behalf Of > Jon Povey > Sent: 04 May 2010 07:02 > To: Chris; [email protected] > Subject: RE: can't detect video input > > Chris wrote: > > I want to revert to the default bootargs that ship with the board, > > but I can't find that info anywhere, and I've written over the NAND > > with new bootargs for the NFS mount. Does anybody know what the > > default bootarg string is? > > With DM355 EVM, I think that info was printed in the getting started or > technical reference dead tree guides that came with the EVM. Not sure about > 6446. Hope that helps or someone else answers.. > > -- > Jon Povey > [email protected] > > Racelogic is a limited company registered in England. Registered number > 2743719 . > Registered Office Unit 10, Swan Business Centre, Osier Way, Buckingham, > Bucks, MK18 1TB . > > The information contained in this electronic mail transmission is intended > by Racelogic Ltd for the use of the named individual or entity to which it > is directed and may contain information that is confidential or privileged. > If you have received this electronic mail transmission in error, please > delete it from your system without copying or forwarding it, and notify the > sender of the error by reply email so that the sender's address records can > be corrected. The views expressed by the sender of this communication do not > necessarily represent those of Racelogic Ltd. Please note that Racelogic > reserves the right to monitor e-mail communications passing through its > network > > > _______________________________________________ > Davinci-linux-open-source mailing list > [email protected] > http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source > _______________________________________________ Davinci-linux-open-source mailing list [email protected] http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
