Hi, We have a TVP5147M1 running in 10-bit BT656 with embedded syncs mode to our DM365, but getting "horrible video" (skewed color space, tons o' rolling noise).
HW connection: Lines Y_0 - Y_7 from the TVP are running to CIN0-CIN7 on the DM365. Lines Y_8 and Y_9 from the TVP are running to YIN0 and YIN1 respectively on the DM365 SW setup: In our board config file, I specified if_type = VPFE_BT656_10BIT In the same file, the output route for the TVP5147 is set to OUTPUT_10BIT_422_EMBEDDED_SYNC In dm365_ccd.c: ccd_config_ycbcr for the case of VPFE_BT656_10BIT, I configure ccdcfg as follows: ccdcfg = ccdcfg | CCD_DATA_PACK8; In the same file I've changed the pix_fmt to CCDC_PIXFMT_YCBCR_16BIT, per the VPFE frontend user guide. TVP Setup: I've set it up to output 10-bit 656 with embedded syncs. We get interrupts, get "video", it just looks really bad. Am I missing something obvious in my setup? Has anyone had success with 10-bit BT.656 on the DM365? Thanks, Paul _______________________________________________ Davinci-linux-open-source mailing list [email protected] http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
