On Wed, Sep 26, 2012 at 8:07 PM, Murali Karicheri <[email protected]> wrote:
> +struct clk_davinci_pll_data {
> + /* physical addresses set by platform code */
> + u32 phy_pllm;
> + /* if PLL has a prediv register this should be non zero */
> + u32 phy_prediv;
> + /* if PLL has a postdiv register this should be non zero */
> + u32 phy_postdiv;
> + /* mapped addresses. should be initialized by */
> + void __iomem *pllm;
> + void __iomem *prediv;
> + void __iomem *postdiv;
> + u32 pllm_mask;
> + u32 prediv_mask;
> + u32 postdiv_mask;
> + u32 num;
> + /* framework flags */
> + u32 flags;
> + /* pll flags */
> + u32 pll_flags;
> + /* use this value for prediv */
> + u32 fixed_prediv;
> + /* multiply PLLM by this factor. By default most SOC set this to zero
> + * that translates to a multiplier of 1 and incrementer of 1.
> + * To override default, set this factor
> + */
> + u32 pllm_multiplier;
> +};
> +
No, that's not what I meant.
I meant like this:
/**
* struct clk_davinci_pll_data - struct holding the PLL data
* phy_pllm: physical addresses set by platform code
* phy_prediv: ...
(...)
*/
struct clk_davinci_pll_data {
u32 phy_pllm;
u32 phy_prediv;
(...)
};
Yours,
Linus Walleij
_______________________________________________
Davinci-linux-open-source mailing list
[email protected]
http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
