Add I2C0 device tree node information to da850-evm. Also, add I2C0 pin muxing information in da850-evm.
Signed-off-by: Vishwanathrao Badarkhe, Manish <manish...@ti.com> --- Depends on patch http://comments.gmane.org/gmane.linux.davinci/25993 arch/arm/boot/dts/da850-evm.dts | 15 +++++++++++++++ arch/arm/boot/dts/da850.dtsi | 10 ++++++++++ 2 files changed, 25 insertions(+), 0 deletions(-) diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts index 8cac9d2..3d8290a 100755 --- a/arch/arm/boot/dts/da850-evm.dts +++ b/arch/arm/boot/dts/da850-evm.dts @@ -27,5 +27,20 @@ serial2: serial@1d0d000 { status = "okay"; }; + i2c0@1c22000 { + status = "okay"; + }; + }; +}; +&pmx_core { + pinctrl-names = "default"; + pinctrl-0 = < + &i2c0_pins + >; + + i2c0_pins: pinmux_i2c0_pins{ + pinctrl-single,bits = < + 0x10 0x00002200 0x0000ff00 /* I2C0_SDA,I2C0_SCL */ + >; }; }; diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi index 1e6d090..f5ee811 100755 --- a/arch/arm/boot/dts/da850.dtsi +++ b/arch/arm/boot/dts/da850.dtsi @@ -66,5 +66,15 @@ interrupt-parent = <&intc>; status = "disabled"; }; + i2c0@1c22000 { + compatible = "ti,davinci-i2c"; + reg = <0x22000 0x1000>; + clock-frequency = <100000>; + interrupts = <15>; + interrupt-parent = <&intc>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; }; }; -- 1.7.4.1 _______________________________________________ Davinci-linux-open-source mailing list Davinci-linux-open-source@linux.davincidsp.com http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
