On 1/24/2013 5:05 PM, Vishwanathrao Badarkhe, Manish wrote:
> Add I2C0 device tree node information to da850-evm.
> Also, add I2C0 pin muxing information in da850-evm.
>
> Signed-off-by: Vishwanathrao Badarkhe, Manish <manish...@ti.com>
> ---
> Depends on patch
> http://comments.gmane.org/gmane.linux.davinci/25993
>
> arch/arm/boot/dts/da850-evm.dts | 15 +++++++++++++++
> arch/arm/boot/dts/da850.dtsi | 10 ++++++++++
> 2 files changed, 25 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts
> index 8cac9d2..3d8290a 100755
> --- a/arch/arm/boot/dts/da850-evm.dts
> +++ b/arch/arm/boot/dts/da850-evm.dts
> @@ -27,5 +27,20 @@
> serial2: serial@1d0d000 {
> status = "okay";
> };
> + i2c0@1c22000 {
This should be
i2c0: i2c@1c22000
to follow the convention elsewhere in file.
> + status = "okay";
> + };
> + };
> +};
> +&pmx_core {
> + pinctrl-names = "default";
> + pinctrl-0 = <
> + &i2c0_pins
> + >;
> +
> + i2c0_pins: pinmux_i2c0_pins{
> + pinctrl-single,bits = <
> + 0x10 0x00002200 0x0000ff00 /* I2C0_SDA,I2C0_SCL */
> + >;
This should go into the dtsi file. See the discussion on NAND DT support
submitted by Anil Kumar.
Thanks,
Sekhar
PS: You are using an old address for Kevin Hilman. The MAINTAINERS file
has been updated for a long time now. Liam's address is also wrong but I
don't have his updated e-mail.
_______________________________________________
Davinci-linux-open-source mailing list
Davinci-linux-open-source@linux.davincidsp.com
http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
