From: Lad, Prabhakar <prabhakar....@ti.com>

add OF support for the tvp514x driver.

Signed-off-by: Lad, Prabhakar <prabhakar....@ti.com>
Cc: Hans Verkuil <hans.verk...@cisco.com>
Cc: Laurent Pinchart <laurent.pinch...@ideasonboard.com>
Cc: Mauro Carvalho Chehab <mche...@redhat.com>
Cc: Guennadi Liakhovetski <g.liakhovet...@gmx.de>
Cc: Sylwester Nawrocki <s.nawro...@samsung.com>
Cc: Sakari Ailus <sakari.ai...@iki.fi>
Cc: Grant Likely <grant.lik...@secretlab.ca>
Cc: Rob Herring <rob.herr...@calxeda.com>
Cc: Rob Landley <r...@landley.net>
Cc: devicetree-disc...@lists.ozlabs.org
Cc: linux-...@vger.kernel.org
Cc: linux-ker...@vger.kernel.org
---
 Changes for v2:
  1: Fixed review comment pointed by Heiko.
  2: Fixed review comment pointed by Laurent.

 This patch is on top of following patches:
  1: https://patchwork.kernel.org/patch/1930941/
  2: http://patchwork.linuxtv.org/patch/16193/
  3: https://patchwork.kernel.org/patch/1944901

 .../devicetree/bindings/media/i2c/tvp514x.txt      |   38 +++++++++++
 drivers/media/i2c/tvp514x.c                        |   70 ++++++++++++++++++--
 2 files changed, 103 insertions(+), 5 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/media/i2c/tvp514x.txt

diff --git a/Documentation/devicetree/bindings/media/i2c/tvp514x.txt 
b/Documentation/devicetree/bindings/media/i2c/tvp514x.txt
new file mode 100644
index 0000000..55d3ffd
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/tvp514x.txt
@@ -0,0 +1,38 @@
+* Texas Instruments TVP514x video decoder
+
+The TVP5146/TVP5146m2/TVP5147/TVP5147m1 device is high quality, single-chip
+digital video decoder that digitizes and decodes all popular baseband analog
+video formats into digital video component. The tvp514x decoder supports 
analog-
+to-digital (A/D) conversion of component RGB and YPbPr signals as well as A/D
+conversion and decoding of NTSC, PAL and SECAM composite and S-video into
+component YCbCr.
+
+Required Properties :
+- compatible: Must be "ti,tvp514x-decoder"
+- hsync-active: HSYNC Polarity configuration for current interface.
+- vsync-active: VSYNC Polarity configuration for current interface.
+- data-active: Clock polarity of the current interface.
+
+Example:
+
+i2c0@1c22000 {
+       ...
+       ...
+
+       tvp514x@5c {
+               compatible = "ti,tvp514x-decoder";
+               reg = <0x5c>;
+
+               port {
+                       tvp514x_1: endpoint {
+                               /* Active high (Defaults to 0) */
+                               hsync-active = <1>;
+                               /* Active high (Defaults to 0) */
+                               hsync-active = <1>;
+                               /* Active low (Defaults to 0) */
+                               data-active = <0>;
+                       };
+               };
+       };
+       ...
+};
diff --git a/drivers/media/i2c/tvp514x.c b/drivers/media/i2c/tvp514x.c
index a4f0a70..24ce759 100644
--- a/drivers/media/i2c/tvp514x.c
+++ b/drivers/media/i2c/tvp514x.c
@@ -12,6 +12,7 @@
  *     Hardik Shah <hardik.s...@ti.com>
  *     Manjunath Hadli <m...@ti.com>
  *     Karicheri Muralidharan <m-kariche...@ti.com>
+ *     Prabhakar Lad <prabhakar....@ti.com>
  *
  * This package is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -33,7 +34,9 @@
 #include <linux/delay.h>
 #include <linux/videodev2.h>
 #include <linux/module.h>
+#include <linux/of_device.h>
 
+#include <media/v4l2-of.h>
 #include <media/v4l2-async.h>
 #include <media/v4l2-device.h>
 #include <media/v4l2-common.h>
@@ -930,6 +933,58 @@ static struct tvp514x_decoder tvp514x_dev = {
 
 };
 
+#if defined(CONFIG_OF)
+static const struct of_device_id tvp514x_of_match[] = {
+       {.compatible = "ti,tvp514x-decoder", },
+       {},
+};
+MODULE_DEVICE_TABLE(of, tvp514x_of_match);
+
+static struct tvp514x_platform_data
+       *tvp514x_get_pdata(struct i2c_client *client)
+{
+       if (!client->dev.platform_data && client->dev.of_node) {
+               struct tvp514x_platform_data *pdata;
+               struct v4l2_of_endpoint bus_cfg;
+               struct device_node *endpoint;
+
+               pdata = devm_kzalloc(&client->dev,
+                               sizeof(struct tvp514x_platform_data),
+                               GFP_KERNEL);
+               client->dev.platform_data = pdata;
+               if (!pdata)
+                       return NULL;
+
+               endpoint = of_get_child_by_name(client->dev.of_node, "port");
+               if (endpoint)
+                       endpoint = of_get_child_by_name(endpoint, "endpoint");
+
+               if (!endpoint) {
+                       v4l2_info(client, "Using default data!!\n");
+               } else {
+                       v4l2_of_parse_parallel_bus(endpoint, &bus_cfg);
+
+                       if (bus_cfg.mbus_flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH)
+                               pdata->hs_polarity = 1;
+                       if (bus_cfg.mbus_flags & V4L2_MBUS_VSYNC_ACTIVE_HIGH)
+                               pdata->vs_polarity = 1;
+                       if (bus_cfg.mbus_flags & V4L2_MBUS_PCLK_SAMPLE_RISING)
+                               pdata->clk_polarity = 1;
+               }
+       }
+
+       return client->dev.platform_data;
+}
+#else
+#define tvp514x_of_match NULL
+
+static struct tvp514x_platform_data
+       *tvp514x_get_pdata(struct i2c_client *client)
+{
+       return client->dev.platform_data;
+}
+#endif
+
 /**
  * tvp514x_probe() - decoder driver i2c probe handler
  * @client: i2c driver client device structure
@@ -941,6 +996,7 @@ static struct tvp514x_decoder tvp514x_dev = {
 static int
 tvp514x_probe(struct i2c_client *client, const struct i2c_device_id *id)
 {
+       struct tvp514x_platform_data *pdata;
        struct tvp514x_decoder *decoder;
        struct v4l2_subdev *sd;
        int ret;
@@ -949,22 +1005,25 @@ tvp514x_probe(struct i2c_client *client, const struct 
i2c_device_id *id)
        if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
                return -EIO;
 
+       pdata = tvp514x_get_pdata(client);
+       if (!pdata) {
+               v4l2_err(client, "No platform data!!\n");
+               return -EPROBE_DEFER;
+       }
+
        decoder = devm_kzalloc(&client->dev, sizeof(*decoder), GFP_KERNEL);
        if (!decoder)
                return -ENOMEM;
 
        /* Initialize the tvp514x_decoder with default configuration */
        *decoder = tvp514x_dev;
-       if (!client->dev.platform_data) {
-               v4l2_err(client, "No platform data!!\n");
-               return -EPROBE_DEFER;
-       }
+
        /* Copy default register configuration */
        memcpy(decoder->tvp514x_regs, tvp514x_reg_list_default,
                        sizeof(tvp514x_reg_list_default));
 
        /* Copy board specific information here */
-       decoder->pdata = client->dev.platform_data;
+       decoder->pdata = pdata;
 
        /**
         * Fetch platform specific data, and configure the
@@ -1096,6 +1155,7 @@ MODULE_DEVICE_TABLE(i2c, tvp514x_id);
 
 static struct i2c_driver tvp514x_driver = {
        .driver = {
+               .of_match_table = tvp514x_of_match,
                .owner = THIS_MODULE,
                .name = TVP514X_MODULE_NAME,
        },
-- 
1.7.4.1

_______________________________________________
Davinci-linux-open-source mailing list
Davinci-linux-open-source@linux.davincidsp.com
http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source

Reply via email to