On 2/25/2013 4:14 PM, Manjunathappa, Prakash wrote: > Enable m25p80 SPI flash support on da850-EVM. Also > add partition information of SPI flash. > > Signed-off-by: Manjunathappa, Prakash <[email protected]> > --- > arch/arm/boot/dts/da850-evm.dts | 40 > +++++++++++++++++++++++++++++++++++++++ > 1 files changed, 40 insertions(+), 0 deletions(-) > > diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts > index 78c8e54..1a28d43 100644 > --- a/arch/arm/boot/dts/da850-evm.dts > +++ b/arch/arm/boot/dts/da850-evm.dts > @@ -46,6 +46,46 @@ > pinctrl-names = "default"; > pinctrl-0 = <&mmc0_pins>; > }; > + spi1: spi@1f0e000 { > + status = "okay"; > + pinctrl-names = "default"; > + pinctrl-0 = <&spi1_pins>; > + flash: m25p80@0 { > + #address-cells = <1>; > + #size-cells = <1>; > + compatible = "m25p80";
Are you sure there is a m25p80 part on these boards? On my board using this patch I get: m25p80 spi32766.0: found m25p64, expected m25p80 I can access the flash just fine though. Thanks, Sekhar _______________________________________________ Davinci-linux-open-source mailing list [email protected] http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
