On Wed, Feb 27, 2013 at 13:55:09, Nori, Sekhar wrote: > On 2/25/2013 4:14 PM, Manjunathappa, Prakash wrote: > > Enable m25p80 SPI flash support on da850-EVM. Also > > add partition information of SPI flash. > > > > Signed-off-by: Manjunathappa, Prakash <[email protected]> > > --- > > arch/arm/boot/dts/da850-evm.dts | 40 > > +++++++++++++++++++++++++++++++++++++++ > > 1 files changed, 40 insertions(+), 0 deletions(-) > > > > diff --git a/arch/arm/boot/dts/da850-evm.dts > > b/arch/arm/boot/dts/da850-evm.dts > > index 78c8e54..1a28d43 100644 > > --- a/arch/arm/boot/dts/da850-evm.dts > > +++ b/arch/arm/boot/dts/da850-evm.dts > > @@ -46,6 +46,46 @@ > > pinctrl-names = "default"; > > pinctrl-0 = <&mmc0_pins>; > > }; > > + spi1: spi@1f0e000 { > > + status = "okay"; > > + pinctrl-names = "default"; > > + pinctrl-0 = <&spi1_pins>; > > + flash: m25p80@0 { > > + #address-cells = <1>; > > + #size-cells = <1>; > > + compatible = "m25p80"; > > Are you sure there is a m25p80 part on these boards? On my board using > this patch I get: > > m25p80 spi32766.0: found m25p64, expected m25p80 >
On my board also I see this warning. Also there is mistake in filesystem partition information specified in this patch, will correct it in next version of patch. Thanks, Prakash > I can access the flash just fine though. > > Thanks, > Sekhar > _______________________________________________ Davinci-linux-open-source mailing list [email protected] http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
