Just so I can sleep again:-), what was the problem if you recall. I believe
I responded that the STDOUT, STDERR might be off on that machine, other than
that I went through the test and even hard coded the same values as well as
had Dona run some test, and I couldn't get it. I believe that, if I recall
correctly, when Dona put warn() before the test, it wasn't printed either,
so I made the conclusion that something is being redirected incorrectly.
Ilya
> -----Original Message-----
> From: Tim Bunce [mailto:[EMAIL PROTECTED]]
> Sent: Wednesday, August 29, 2001 3:22 PM
> To: Tim Bunce
> Cc: Sterin, Ilya; 'Dana Kaempen '; '[EMAIL PROTECTED] '
> Subject: Re: Testing DBD-1.08
>
>
> I reproduced it using perl5.004_04 and it was fixed when I installed
> the latest DBI release.
>
> Tim.
>
> On Thu, Aug 09, 2001 at 12:29:02AM +0100, Tim Bunce wrote:
> > On Wed, Aug 08, 2001 at 01:50:20PM -0600, Sterin, Ilya wrote:
> > > That test checks for the warn message, so you should be fine,
> unless you
> > > heavily rely on parsing the warn messages. It might be a
> small change in
> > > the warn string, though I can't see anything else being wrong, since
> > > PrintError calls warn first, then RaiseError exits the eval
> block, so you
> > > should be OK.
> > >
> > > I'll take a look at this today and see why this is happening.
> >
> > Thanks. What's bizzare is that there's no way that the test should fail
> > without also printing out a message "warn error: ``$warn''
> expected 'do failed:'"
> >
> > Uh, Dana, did you record stderr as well as stdout into the log?
> > That would explain the missing message.
> >
> > The best way to log a session is to use the 'typescript' command
> > at the start and exit (the new shell it gives you) at the end.
> >
> > Tim.
> >
> > > Ilya
> > >
> > > -----Original Message-----
> > > From: Dana Kaempen
> > > To: [EMAIL PROTECTED]
> > > Sent: 8/8/01 1:38 PM
> > > Subject: Re: Testing DBD-1.08
> > >
> > > I still need help, but I think I can provide a bit more info, after
> > > seeing some examples of what others have provided. Please let me know
> > > if more info is needed than the attached 'make test' output using the
> > > verbose option.
> > >
> > > Thanks again. Here's the intro to the problem I reported yesterday:
> > > > I'm trying to recompile DBD-1.08/DBI-1.14 on AIX 4.3.3, using Perl
> > > 5.006. DBI compiled & installed fine; Oracle's
> > > > running at v8.1.6; I can connect to the database; DBD compiled fine;
> > > the problem is that one test fails:
> > > (see attached make test output)
> > >
> > > Please help, anybody - thank you!
> > >
> > > Dana
> > > --
> > > ..d..ecay
> > >
> > > mailto:[EMAIL PROTECTED]
> > > ------------------------
> > > "Keep the wheels rolling." - Anonymous traffic prophet
> > > <<maketest.out>>
>
