I have Perl 5.6.1 installed from the HP application disk for HP-UX 11i. I am running
HP-UX 11.11 (11i) 64 bit. I have also installed "gcc-3.1". When I try to install the
DBI module (most any version - output from 1.26 is below), in the "make" step I get
"*** Error exit code 1" (see output below)
Any help would be greatly appreciated.
Ri03u08# perl Makefile.PL
*** You are using a perl with experimental threading enabled!
*** You should be aware that using multiple threads is unstable
*** are should NOT be done in production environments.
DBI 5.005-style thread mutex protection is enabled
DBI hs not been tested with new perl iThreads
*** Note:
The optional PlRPC-modules (RPC::PlServer etc) are not installed.
If you want to use the DBD::Proxy driver and DBI::ProxyServer
modules, then you'll need to install the RPC::PlServer, RPC::PlClient,
Storable and Net::Daemon modules. The CPAN Bundle::DBI may help you.
You can install them any time after installing the DBI.
You do *not* need these modules for typical DBI usage.
Optional modules are available from any CPAN mirror, in particular
http://www.perl.com/CPAN/modules/by-module
http://www.perl.org/CPAN/modules/by-module
ftp://ftp.funet.fi/pub/languages/perl/CPAN/modules/by-module
Creating extra DBI::PurePerl test: t/zz_01basics_pp.t
Creating extra DBI::PurePerl test: t/zz_02dbidrv_pp.t
Creating extra DBI::PurePerl test: t/zz_03hleak_pp.t
Creating extra DBI::PurePerl test: t/zz_04mods_pp.t
Creating extra DBI::PurePerl test: t/zz_10examp_pp.t
Creating extra DBI::PurePerl test: t/zz_15array_pp.t
Creating extra DBI::PurePerl test: t/zz_20meta_pp.t
Creating extra DBI::PurePerl test: t/zz_30subclass_pp.t
Creating extra DBI::PurePerl test: t/zz_40profile_pp.t
Creating extra DBI::PurePerl test: t/zz_60preparse_pp.t
Creating extra DBI::PurePerl test: t/zz_70shell_pp.t
Creating extra DBI::PurePerl test: t/zz_80proxy_pp.t
Checking if your kit is complete...
Looks good
Writing Makefile for DBI
Remember to actually *read* the README file!
Use 'make' to build the software (dmake or nmake on Windows).
Then 'make test' to execute self tests.
Then 'make install' to install the DBI and then delete this working
directory before unpacking and building any DBD::* drivers.
Ri03u08#
Ri03u08# make
//opt/perl/bin/perl -I/opt/perl/lib/5.6.1/PA-RISC1.1-thread-multi -I
/opt/perl/lib/5.6.1 -MExtUtils::Command -e mkpath blib/lib/DBI
rm -f blib/lib/DBI/Changes.pm
cp Changes blib/lib/DBI/Changes.pm
cp Driver_xst.h blib/arch/auto/DBI/Driver_xst.h
cp DBIXS.h blib/arch/auto/DBI/DBIXS.h
cp lib/DBD/NullP.pm blib/lib/DBD/NullP.pm
cp dbipport.h blib/arch/auto/DBI/dbipport.h
cp lib/DBI/Format.pm blib/lib/DBI/Format.pm
cp lib/DBI/Const/GetInfoReturn.pm blib/lib/DBI/Const/GetInfoReturn.pm
cp dbd_xsh.h blib/arch/auto/DBI/dbd_xsh.h
cp lib/DBI/Const/GetInfo/ANSI.pm blib/lib/DBI/Const/GetInfo/ANSI.pm
cp lib/DBI/Profile.pm blib/lib/DBI/Profile.pm
cp lib/DBI/PurePerl.pm blib/lib/DBI/PurePerl.pm
cp lib/DBI/Shell.pm blib/lib/DBI/Shell.pm
cp DBI.pm blib/lib/DBI.pm
cp lib/DBI/FAQ.pm blib/lib/DBI/FAQ.pm
cp lib/DBD/ExampleP.pm blib/lib/DBD/ExampleP.pm
cp lib/Bundle/DBI.pm blib/lib/Bundle/DBI.pm
cp lib/Win32/DBIODBC.pm blib/lib/Win32/DBIODBC.pm
cp lib/DBI/W32ODBC.pm blib/lib/DBI/W32ODBC.pm
cp lib/DBI/DBD.pm blib/lib/DBI/DBD.pm
cp lib/DBI/Const/GetInfoType.pm blib/lib/DBI/Const/GetInfoType.pm
cp lib/DBI/ProxyServer.pm blib/lib/DBI/ProxyServer.pm
cp lib/DBD/Proxy.pm blib/lib/DBD/Proxy.pm
cp dbi_sql.h blib/arch/auto/DBI/dbi_sql.h
cp Driver.xst blib/arch/auto/DBI/Driver.xst
cp lib/DBI/Const/GetInfo/ODBC.pm blib/lib/DBI/Const/GetInfo/ODBC.pm
cp lib/DBD/Sponge.pm blib/lib/DBD/Sponge.pm
//opt/perl/bin/perl -p -e "s/~DRIVER~/Perl/g" < blib/arch/auto/DBI/Dr
iver.xst > Perl.xsi
//opt/perl/bin/perl -I/opt/perl/lib/5.6.1/PA-RISC1.1-thread-multi -I/
opt/perl/lib/5.6.1 /opt/perl/lib/5.6.1/ExtUtils/xsubpp -typemap /opt/perl/li
b/5.6.1/ExtUtils/typemap Perl.xs > Perl.xsc && mv Perl.xsc Perl.c
gcc -c -D_POSIX_C_SOURCE=199506L -D_HPUX_SOURCE -L/lib/pa1.1 -DUINT3
2_MAX_BROKEN -mpa-risc-1-1 -fPIC -fno-strict-aliasing -I/usr/local/include -D
_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O -DVERSION=\"1.26\" -DXS_VERSI
ON=\"1.26\" -fPIC -I/opt/perl/lib/5.6.1/PA-RISC1.1-thread-multi/CORE -Wall -W
no-comment Perl.c
cc1: warning: changing search order for system directory "/usr/local/include"
cc1: warning: as it has already been specified as a non-system directory
In file included from /opt/perl/lib/5.6.1/PA-RISC1.1-thread-multi/CORE/perl..h
:713,
from DBIXS.h:19,
from Perl.xs:1:
/usr/include/sys/socket.h:484: parse error before "sendfile"
/usr/include/sys/socket.h:485: parse error before "bsize_t"
/usr/include/sys/socket.h:486: parse error before "sendpath"
/usr/include/sys/socket.h:487: parse error before "bsize_t"
/usr/include/sys/socket.h:501: parse error before "__sendfile64"
/usr/include/sys/socket.h:501: parse error before "bsize_t"
/usr/include/sys/socket.h:502: parse error before "__sendpath64"
/usr/include/sys/socket.h:502: parse error before "bsize_t"
/usr/include/sys/socket.h:504: parse error before "sendfile"
/usr/include/sys/socket.h: In function `sendfile':
/usr/include/sys/socket.h:504: parse error before "bsize_t"
/usr/include/sys/socket.h: At top level:
/usr/include/sys/socket.h:505: parse error before "sendpath"
/usr/include/sys/socket.h: In function `sendpath':
/usr/include/sys/socket.h:505: parse error before "bsize_t"
Perl.xsi: In function `XS_DBD__Perl__st__prepare':
Perl.xsi:253: warning: operation on `lna' may be undefined
Perl.xsi: In function `XS_DBD__Perl__st_bind_param':
Perl.xsi:289: warning: operation on `lna' may be undefined
Perl.xsi: In function `XS_DBD__Perl__st_bind_param_inout':
Perl.xsi:325: warning: operation on `lna' may be undefined
*** Error exit code 1
Stop.
Ri03u08#
Ri03u08# perl -V
Summary of my perl5 (revision 5.0 version 6 subversion 1) configuration:
Platform:
osname=hpux, osvers=11.00, archname=PA-RISC1.1-thread-multi
uname='hp-ux llbertha b.11.00 u 9000800 2002402864 unlimited-user licen
e '
config_args='-des -Dcf_by=ActiveState -Dcf_email=ActivePerl@ActiveState
com -Uinstallusrbinperl -Dusethreads -Duseithreads -Duselargefiles -Dinc_ve
sion_list=5.6.0/$archname 5.6.0 -Dcc=gcc -Accflags=-mpa-risc-1-1 -fPIC -Dcc
dlflags=-fPIC -Dd_attribut=undef -Darchname=PA-RISC1.1 -Dprefix=/opt/perl'
hint=recommended, useposix=true, d_sigaction=define
usethreads=define use5005threads=undef useithreads=define usemultiplici
y=define
useperlio=undef d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=undef use64bitall=undef uselongdouble=undef
Compiler:
cc='gcc', ccflags ='-D_POSIX_C_SOURCE=199506L -D_HPUX_SOURCE -L/lib/pa1
1 -DUINT32_MAX_BROKEN -mpa-risc-1-1 -fPIC -fno-strict-aliasing -I/usr/local
include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-O',
cppflags='-D_POSIX_C_SOURCE=199506L -D_HPUX_SOURCE -L/lib/pa1.1 -DUINT3
_MAX_BROKEN -mpa-risc-1-1 -fPIC -fno-strict-aliasing -I/usr/local/include'
ccversion='', gccversion='2.9-hppa-991112', gccosandvers='hpux11.00'
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=4321
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t', lsee
size=8
alignbytes=8, usemymalloc=n, prototype=define
Linker and Libraries:
ld='ld', ldflags =' -L/usr/local/lib'
libpth=/usr/local/lib /lib /usr/lib /usr/ccs/lib
libs=-lnsl -lnm -lndbm -lmalloc -ldld -lm -lpthread -lc -lndir -lcrypt
lsec
perllibs=-lnsl -lnm -lmalloc -ldld -lm -lpthread -lc -lndir -lcrypt -ls
c
libc=/lib/libc.sl, so=sl, useshrplib=false, libperl=libperl.a
Dynamic Linking:
dlsrc=dl_hpux.xs, dlext=sl, d_dlsymun=undef, ccdlflags='-Wl,-E '
cccdlflags='-fPIC', lddlflags='-b -L/usr/local/lib'
Characteristics of this binary (from libperl):
Compile-time options: MULTIPLICITY USE_ITHREADS USE_LARGE_FILES PERL_IMPL
CIT_CONTEXT
Locally applied patches:
ActivePerl Build 627
Built under hpux
Compiled at Jun 20 2001 21:42:53
@INC:
/opt/perl/lib/5.6.1/PA-RISC1.1-thread-multi
/opt/perl/lib/5.6.1
/opt/perl/lib/site_perl/5.6.1/PA-RISC1.1-thread-multi
/opt/perl/lib/site_perl/5.6.1
/opt/perl/lib/site_perl
Briscoe Brown
Wyeth Consumer Healthcare
804-257-2663 (V) 804-256-5992 (F)
