when i try to install my DBI module these are the warning i get from it. can any one
tell, wats the command to configure the with threading disabled... and wat are thses
PIRPC n do i realy have to install these first before instaling the DBI module..
i'm using perl, v5.8.0 built for MSWin32-x86-multi-thread on Win 2000 pro... Following
are the few warnings i copy paste here..
ur help will be really appreaciated..
thanks
C:\DBI\DBI-1.38.tar\DBI-1.38>perl Makefile.pl
*** You are using a perl configured with threading enabled.
*** You should be aware that using multiple threads is
*** not recommended for production environments.
*** Note:
The optional PlRPC-modules (RPC::PlServer etc) are not installed.
If you want to use the DBD::Proxy driver and DBI::ProxyServer
modules, then you'll need to install the RPC::PlServer, RPC::PlClient,
Storable and Net::Daemon modules. The CPAN Bundle::DBI may help you.
You can install them any time after installing the DBI.
You do *not* need these modules for typical DBI usage.
Optional modules are available from any CPAN mirror, in particular
http://www.perl.com/CPAN/modules/by-module
http://www.perl.org/CPAN/modules/by-module
ftp://ftp.funet.fi/pub/languages/perl/CPAN/modules/by-module
*** Warning: Colons in the current directory path (C:/DBI/DBI-1.38.tar/DBI-1.3
may cause problems
Creating extra DBI::PurePerl test: t/zz_01basics_pp.t
Creating extra DBI::PurePerl test: t/zz_02dbidrv_pp.t
Creating extra DBI::PurePerl test: t/zz_03handle_pp.t
Creating extra DBI::PurePerl test: t/zz_04mods_pp.t
Creating extra DBI::PurePerl test: t/zz_05thrclone_pp.t (use threads)
Creating extra DBI::PurePerl test: t/zz_06attrs_pp.t
Creating extra DBI::PurePerl test: t/zz_07kids_pp.t
Creating extra DBI::PurePerl test: t/zz_08keeperr_pp.t
Creating extra DBI::PurePerl test: t/zz_10examp_pp.t
Creating extra DBI::PurePerl test: t/zz_15array_pp.t
Creating extra DBI::PurePerl test: t/zz_20meta_pp.t
Creating extra DBI::PurePerl test: t/zz_30subclass_pp.t
Creating extra DBI::PurePerl test: t/zz_40profile_pp.t
Creating extra DBI::PurePerl test: t/zz_41prof_dump_pp.t
Creating extra DBI::PurePerl test: t/zz_42prof_data_pp.t
Creating extra DBI::PurePerl test: t/zz_60preparse_pp.t
Creating extra DBI::PurePerl test: t/zz_80proxy_pp.t
*** Warning: Colons in the current directory path (C:/DBI/DBI-1.38.tar/DBI-1.3
may cause problems
*** Warning: Colons in the current directory path (C:/DBI/DBI-1.38.tar/DBI-1.3
may cause problems
Remember to actually *read* the README file!
Use 'make' to build the software (dmake or nmake on Windows).
Then 'make test' to execute self tests.
Then 'make install' to install the DBI and then delete this working
directory before unpacking and building any DBD::* drivers.
Windows users need to use the correct make command.
That may be nmake or dmake depending on which Perl you are using.
If using the Win32 ActiveState build then it is recommended that you
use the ppm utility to fetch and install a prebuilt DBI instead.
Writing Makefile for DBI
Farhan
UET, Lahore
