Paul, I'm not sure about this. I built my Perl (v 5.8.2) and installed Bundle::DBI (I think - it was a long time ago) and installed DBD::File seperately.
I'm stumped on this one. ----------------- Ron Reidy Lead DBA Array BioPharma, Inc. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Sent: Wednesday, July 06, 2005 9:16 AM To: dbi-users Subject: RE: Installing DBD::File via CPAN Hi Ron, I built this directly from source. The older version seems to have come when I installed DBI (again built from source) so it seems like the newer version doesn't default to installing into the same place, perhaps? Paul Quoting "Reidy, Ron" <[EMAIL PROTECTED]>: > Paul, > > I do not believe it is a good idea to delete a module in the module tree. > There are (several?) lists of modules stored somewhere in the lib > directory. > > I am not really sure how you have 2 different File.pm - I have only 1 under > the site_perl directory. > > Did you build Perl from source, or install via a RPM or binary distro? > > ----------------- > Ron Reidy > Lead DBA > Array BioPharma, Inc. > > > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > Sent: Wednesday, July 06, 2005 8:00 AM > To: dbi-users > Subject: RE: Installing DBD::File via CPAN > > > Hi everyone, > > After a little tracking down I realized what's happening, but I can't quite > > pick out why. There are two versions of DBD::File in my tree one at: > /db2blast/Paul/perl5.8.7/lib/site_perl/5.8.7/aix/DBD (v0.33) > and one at > /db2blast/Paul/perl5.8.7/lib/site_perl/5.8.7/DBD (v0.34) > > This was a fresh build of perl, and all modules were updated/installed via > the > CPAN module so I wasn't expecting to get myself confused with multiple > versions > like so. Any ideas where I may have gone wrong? Or, for that matter, am I > > safe just deleting File.pm from the aix subdirectory? > > Many thanks, > Paul > > > Quoting "Reidy, Ron" <[EMAIL PROTECTED]>: > > > Paul, > > > > Did you check the timestamp of the new .pm and/or .so? Maybe the > internal > > $VERSION variable was not updated by the module author. > > > > ----------------- > > Ron Reidy > > Lead DBA > > Array BioPharma, Inc. > > > > > > -----Original Message----- > > From: Paul Boutros [mailto:[EMAIL PROTECTED] > > Sent: Tuesday, July 05, 2005 10:52 AM > > To: dbi-users > > Subject: Installing DBD::File via CPAN > > > > > > Hello, > > > > I have a small-but-weird problem. When I install the 0.34 release of > > DBD::File via CPAN it seems to make/test/install properly but... it just > > doesn't stick. The installation seems to stay at 0.33. I also get when > I > > download directly and do the make/test/install myself. Here's the > session > > to show what I mean. Any ideas what might be going on? This is Perl > 5.8.7 > > on AIX 5.2.0.0 > > > > Paul > > > > $ perl -v > > > > This is perl, v5.8.7 built for aix > > > > Copyright 1987-2005, Larry Wall > > > > Perl may be copied only under the terms of either the Artistic License or > > the > > GNU General Public License, which may be found in the Perl 5 source kit. > > > > Complete documentation for Perl, including FAQ lists, should be found on > > this system using `man perl' or `perldoc perl'. If you have access to > the > > Internet, point your browser at http://www.perl.org/, the Perl Home Page. > > > > $ perl -MCPAN -e shell > > Terminal does not support AddHistory. > > > > cpan shell -- CPAN exploration and modules installation (v1.7601) > > ReadLine support available (try 'install Bundle::CPAN') > > > > cpan> r > > CPAN: Storable loaded ok > > Going to read /db2/dlink/.cpan/Metadata > > Database was generated on Mon, 04 Jul 2005 19:58:56 GMT > > > > Package namespace installed latest in CPAN file > > DBD::File 0.33 0.34 > > J/JZ/JZUCKER/DBD-File-0.34.tar.gz > > 118 installed modules have no parseable version number > > > > cpan> install DBD::File > > Running install for module DBD::File > > Running make for J/JZ/JZUCKER/DBD-File-0.34.tar.gz > > CPAN: Digest::MD5 loaded ok > > CPAN: Compress::Zlib loaded ok > > Checksum for > > /db2/dlink/.cpan/sources/authors/id/J/JZ/JZUCKER/DBD-File-0.34.tar.gz ok > > Scanning cache /db2/dlink/.cpan/build for sizes > > x DBD-File-0.34 > > x DBD-File-0.34/MANIFEST, 142 bytes, 1 media blocks. > > x DBD-File-0.34/META.yml, 340 bytes, 1 media blocks. > > x DBD-File-0.34/t > > x DBD-File-0.34/t/00base.t, 96 bytes, 1 media blocks. > > x DBD-File-0.34/Changes, 233 bytes, 1 media blocks. > > x DBD-File-0.34/lib > > x DBD-File-0.34/lib/DBD > > x DBD-File-0.34/lib/DBD/File.pm, 19878 bytes, 39 media blocks. > > x DBD-File-0.34/README, 352 bytes, 1 media blocks. > > x DBD-File-0.34/Makefile.PL, 524 bytes, 2 media blocks. > > Removing previously used /db2/dlink/.cpan/build/DBD-File-0.34 > > > > CPAN.pm: Going to build J/JZ/JZUCKER/DBD-File-0.34.tar.gz > > > > Checking if your kit is complete... > > Looks good > > Writing Makefile for DBD::File > > cp lib/DBD/File.pm blib/lib/DBD/File.pm > > Manifying blib/man3/DBD::File.3 > > /usr/bin/make -- OK > > Running make test > > PERL_DL_NONLAZY=1 /db2blast/Paul/perl5.8.7/bin/perl > > "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" > > t/*.t > > t/00base....ok > > All tests successful. > > Files=1, Tests=1, 0 wallclock secs ( 0.03 cusr + 0.04 csys = 0.07 CPU) > > Target "test" is up to date. > > /usr/bin/make test -- OK > > Running make install > > Writing > > /db2blast/Paul/perl5.8.7/lib/site_perl/5.8.7/aix/auto/DBD/File/.packlist > > Appending installation info to > > /db2blast/Paul/perl5.8.7/lib/5.8.7/aix/perllocal.pod > > /usr/bin/make install -- OK > > > > cpan> q > > Terminal does not support GetHistory. > > Lockfile removed. > > $ perl -MDBD::File -e 'print $DBD::File::VERSION' > > 0.33$ > > $ perl -MCPAN -e shell > > Terminal does not support AddHistory. > > > > cpan shell -- CPAN exploration and modules installation (v1.7601) > > ReadLine support available (try 'install Bundle::CPAN') > > > > cpan> r > > CPAN: Storable loaded ok > > Going to read /db2/dlink/.cpan/Metadata > > Database was generated on Mon, 04 Jul 2005 19:58:56 GMT > > > > Package namespace installed latest in CPAN file > > DBD::File 0.33 0.34 > > J/JZ/JZUCKER/DBD-File-0.34.tar.gz > > 118 installed modules have no parseable version number > > > > cpan> q > > Terminal does not support GetHistory. > > Lockfile removed. > > $ perl -v > > > > This is perl, v5.8.7 built for aix > > > > Copyright 1987-2005, Larry Wall > > > > Perl may be copied only under the terms of either the Artistic License or > > the > > GNU General Public License, which may be found in the Perl 5 source kit. > > > > Complete documentation for Perl, including FAQ lists, should be found on > > this system using `man perl' or `perldoc perl'. If you have access to > the > > Internet, point your browser at http://www.perl.org/, the Perl Home Page. > > > > $ oslevel > > 5.2.0.0 > > > > > > This electronic message transmission is a PRIVATE communication which > > contains > > information which may be confidential or privileged. The information is > > intended > > to be for the use of the individual or entity named above. If you are not > the > > > > intended recipient, please be aware that any disclosure, copying, > > distribution > > or use of the contents of this information is prohibited. Please notify > the > > sender of the delivery error by replying to this message, or notify us > by > > telephone (877-633-2436, ext. 0), and then delete it from your system. > > > > > > > > This electronic message transmission is a PRIVATE communication which > contains > information which may be confidential or privileged. The information is > intended > to be for the use of the individual or entity named above. If you are not the > > intended recipient, please be aware that any disclosure, copying, > distribution > or use of the contents of this information is prohibited. Please notify the > sender of the delivery error by replying to this message, or notify us by > telephone (877-633-2436, ext. 0), and then delete it from your system. > > This electronic message transmission is a PRIVATE communication which contains information which may be confidential or privileged. The information is intended to be for the use of the individual or entity named above. If you are not the intended recipient, please be aware that any disclosure, copying, distribution or use of the contents of this information is prohibited. Please notify the sender of the delivery error by replying to this message, or notify us by telephone (877-633-2436, ext. 0), and then delete it from your system.
