for your pleasure... -----Ursprüngliche Nachricht----- Von: Pfister, Govinda Gesendet: Mittwoch, 14. Februar 2007 19:05 An: 'Jonathan Leffler' Betreff: AW: DBD::Informix Make test Problem
Hello Jonathan, Here comes the output of esql -V IBM Informix CSDK Version 2.90, IBM Informix-ESQL Version 2.90.UC4 Software Serial Number AAA#B000000 And I do only have the following sh-scripts in my DBD::Informix Install: [EMAIL PROTECTED]:/.cpan/build/DBD-Informix-2005.02 # ls *.sh test.all.sh test.c4gl.sh test.one.sh test.quiet.sh test.run.sh Thanks for your help. Govinda -----Ursprüngliche Nachricht----- Von: Jonathan Leffler [mailto:[EMAIL PROTECTED] Gesendet: Mittwoch, 14. Februar 2007 18:25 An: Pfister, Govinda Cc: dbi-users@perl.org; Janssen, Johann Betreff: Re: DBD::Informix Make test Problem On 2/14/07, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote: > I do have a problem with "make test" run for the DBD::Informix module. > The error is shown below. What is the problem? Is it safe to proceed > to "make install"? > Not comfortable - I wouldn't recommend the install. uname -a > ------------------------------ > SunOS ds68001a 5.10 Generic_118833-18 sun4u sparc SUNW,Sun-Fire-V490 > > > env | sort > --------------------------- > CMASK=022 > [EMAIL PROTECTED] > DBD_INFORMIX_NO_SBSPACE=1 > DBD_INFORMIX_PASSWORD=XXXXXXX > DBD_INFORMIX_USERNAME=XXXXXXX > [...] > _=/bin/env > > > > dbaccess -V > ---------------------------- > DB-Access Version 9.40.FC6 > Software Serial Number AAA#B000000 64-bit database server... esql -v > ------------ Next time, please use '-V' (capital letter, not lower case). [Actually, please include the output of 'esql -V' if you respond.] Reading specs from /usr/local/lib/gcc/sparc-sun-solaris2.10/3.4.6/specs > Configured with: ../configure --with-as=/usr/ccs/bin/as > --with-ld=/usr/ccs/bin/ld --enable-shared --enable-languages=c,c++,f77 > Thread model: posix gcc version 3.4.6 [...] > [EMAIL PROTECTED]:/.cpan/build/DBD-Informix-2005.02 # esql -v Reading > specs from /usr/local/lib/gcc/sparc-sun-solaris2.10/3.4.6/specs > [...] > > perl -V > -------------- > Summary of my perl5 (revision 5 version 8 subversion 7) configuration: > Platform: > osname=solaris, osvers=2.10, archname=sun4-solaris > uname='sunos ds68001a 5.10 generic_118833-18 sun4u sparc > sunw,sun-fire-v490 ' > config_args='-ds -e -Dprefix=/usr/local' > hint=recommended, useposix=true, d_sigaction=define > usethreads=undef use5005threads=undef useithreads=undef > usemultiplicity=undef > useperlio=define d_sfio=undef uselargefiles=define usesocks=undef > use64bitint=undef use64bitall=undef uselongdouble=undef > usemymalloc=n, bincompat5005=undef > Compiler: > cc='gcc', ccflags ='-fno-strict-aliasing -pipe > -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64', > optimize='-O', > cppflags='-fno-strict-aliasing -pipe -I/usr/local/include' > ccversion='', gccversion='3.4.6', gccosandvers='solaris2.10' > intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=4321 > d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16 > ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t', 32-bit Perl... You must be using a CSDK 2.xx.UCx version, I think? lseeksize=8 > alignbytes=8, prototype=define > Linker and Libraries: > ld='gcc', ldflags =' -L/usr/local/lib ' > libpth=/usr/local/lib /usr/lib /usr/ccs/lib > libs=-lsocket -lnsl -lgdbm -ldl -lm -lc > perllibs=-lsocket -lnsl -ldl -lm -lc > libc=/lib/libc.so, so=so, useshrplib=false, libperl=libperl.a > gnulibc_version='' > Dynamic Linking: > dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' ' > cccdlflags='-fPIC', lddlflags='-G -L/usr/local/lib' > > > Characteristics of this binary (from libperl): > Compile-time options: USE_LARGE_FILES > Built under solaris > Compiled at Jan 26 2007 14:13:46 > @INC: > /usr/local/lib/perl5/5.8.7/sun4-solaris > /usr/local/lib/perl5/5.8.7 > /usr/local/lib/perl5/site_perl/5.8.7/sun4-solaris > /usr/local/lib/perl5/site_perl/5.8.7 > /usr/local/lib/perl5/site_perl > > > make test > --------------- > > PERL_DL_NONLAZY=1 /bin/perl5.8.7 "-MExtUtils::Command::MM" "-e" > "test_harness(0, 'blib/lib', 'blib/arch')" t/t00basic.t t/t01stproc.t > t/t02ixtype.t t/t05dbase.t t/t07dblist.t t/t08fork.t t/t09exec.t > t/t10sqlca.t t/t12bindval.t t/t13bindref.t t/t14bindcol.t > t/t15bindtyp.t t/t20error.t t/t21mconn.t t/t22mconn.t t/t23mconn.t > t/t24mcurs.t t/t25dratt.t t/t28dtlit.t t/t29update.t t/t30update.t > t/t31nulls.t t/t32nulls.t t/t33holdcurs.t t/t35cursor.t t/t40rows.t > t/t41txacoff.t t/t42txacon.t t/t43trans.t t/t44txansi.t t/t46chpblk.t > t/t50update.t t/t51getinfo.t t/t53types.t t/t54native.t t/t55mdata.t > t/t56tabinfo.t t/t57tables.t t/t58typeinfoall.t t/t60unlog.t > t/t65updcur.t t/t66insert.t t/t72blob.t t/t73blobupd.t t/t74blob.t > t/t75blob.t t/t76blob.t t/t90ius.t t/t91udts.t t/t92rows.t > t/t93lvarchar.t t/t94bool.t t/t95int8.t t/t98pod.t t/t99clean.t > t/t00basic..........ok t/t01stproc.........ok t/t02ixtype.........ok > t/t05dbase..........ok t/t07dblist.........ok t/t08fork...........ok > t/t09exec...........ok t/t10sqlca..........ok t/t12bindval........ok > t/t13bindref........skipped > all skipped: bind_param_inout not supported by DBD::Informix > t/t14bindcol........ok t/t15bindtyp........ok t/t20error..........ok > t/t21mconn..........ok t/t22mconn..........ok t/t23mconn..........ok > t/t24mcurs..........ok t/t25dratt..........ok t/t28dtlit..........ok > t/t29update.........ok t/t30update.........ok t/t31nulls..........ok > t/t32nulls..........ok t/t33holdcurs.......ok t/t35cursor.........ok > t/t40rows...........ok t/t41txacoff........dubious > Test returned status 1 (wstat 256, 0x100) DIED. FAILED tests > 10, 14-15, 18 > Failed 4/19 tests, 78.95% okay t/t42txacon.........ok txacoff - Transactions with autocommit off. txacon - Transactions with autocommit on. I don't recall failures in txacoff - I would expect it pass. Please send the verbose output of the test. t/t43trans..........dubious > Test returned status 1 (wstat 256, 0x100) DIED. FAILED tests > 6, 11, 15-16, 19 > Failed 5/20 tests, 75.00% okay Another set of transaction tests - please send the verbose output of the test. t/t44txansi.........skipped > all skipped: MODE ANSI test - database '[EMAIL PROTECTED]' > is not MODE ANSI t/t46chpblk.........ok t/t50update.........skipped > all skipped: MODE ANSI test - database '[EMAIL PROTECTED]' > is not MODE ANSI t/t51getinfo........ok t/t53types..........ok > t/t54native.........ok t/t55mdata..........ok t/t56tabinfo........ok > t/t57tables.........ok t/t58typeinfoall....ok t/t60unlog..........ok > t/t65updcur.........dubious > Test returned status 1 (wstat 256, 0x100) DIED. FAILED tests > 7, 15 > Failed 2/16 tests, 87.50% okay updcur - Update with the WHERE CURRENT OF clause - again, please send verbose test output. t/t66insert.........ok > t/t72blob...........ok > t/t73blobupd........ok > t/t74blob...........ok > t/t75blob...........ok > t/t76blob...........ok > t/t90ius............ok > t/t91udts...........ok > t/t92rows...........ok > t/t93lvarchar.......ok > t/t94bool...........ok > t/t95int8...........ok > t/t98pod............ok > t/t99clean..........ok > Failed Test Stat Wstat Total Fail List of Failed > ---------------------------------------------------------------------- > -- > ------- > t/t41txacoff.t 1 256 19 4 10 14-15 18 > t/t43trans.t 1 256 20 5 6 11 15-16 19 > t/t65updcur.t 1 256 16 2 7 15 > 3 tests skipped. > Failed 3/55 test scripts. 11/834 subtests failed. > Files=55, Tests=834, 17 wallclock secs ( 9.53 cusr + 0.71 csys = > 10.24 > CPU) > Failed 3/55 test programs. 11/834 subtests failed. > *** Error code 29 > make: Fatal error: Command failed for target `test_dynamic' > To get verbose test output of the three tests: sh test.verbose.sh t/t4[13]* t/t65* -- Jonathan Leffler <[EMAIL PROTECTED]> #include <disclaimer.h> Guardian of DBD::Informix - v2005.02 - http://dbi.perl.org "I don't suffer from insanity - I enjoy every minute of it."
