Use ne.c driver for Atari EtherNEC and NetUSBee network adapters.
Signed-off-by: Michael Schmitz <[email protected]>
---
arch/m68k/Kconfig.devices | 11 +++++++++++
drivers/net/ethernet/8390/Kconfig | 3 ++-
drivers/net/ethernet/8390/ne.c | 2 ++
3 files changed, 15 insertions(+), 1 deletions(-)
diff --git a/arch/m68k/Kconfig.devices b/arch/m68k/Kconfig.devices
index d50ecbf..1c38a91 100644
--- a/arch/m68k/Kconfig.devices
+++ b/arch/m68k/Kconfig.devices
@@ -65,6 +65,17 @@ config ATARI_ETHERNAT
To compile the actual ethernet driver, choose Y or M for the SMC91X
option in the network device section; the module will be called
smc91x.
+config ATARI_ETHERNEC
+ bool "Atari EtherNEC Ethernet support"
+ depends on ATARI_ROM_ISA
+ ---help---
+ Say Y to include support for the EtherNEC and NetUSBee network
adapters
+ for the ROM port. The driver works by polling instead of interrupts,
so
+ it is quite slow.
+
+ To compile the actual ethernet driver, choose Y or M in for the NE2000
+ option in the network device section; the module will be called ne.
+
endmenu
menu "Character devices"
diff --git a/drivers/net/ethernet/8390/Kconfig
b/drivers/net/ethernet/8390/Kconfig
index a5f91e1..53abc78 100644
--- a/drivers/net/ethernet/8390/Kconfig
+++ b/drivers/net/ethernet/8390/Kconfig
@@ -91,7 +91,8 @@ config MCF8390
config NE2000
tristate "NE2000/NE1000 support"
- depends on (ISA || (Q40 && m) || M32R || MACH_TX49XX)
+ depends on (ISA || (Q40 && m) || M32R || MACH_TX49XX || \
+ ATARI_ETHERNEC)
select CRC32
---help---
If you have a network (Ethernet) card of this type, say Y and read
diff --git a/drivers/net/ethernet/8390/ne.c b/drivers/net/ethernet/8390/ne.c
index 47618e5..49948f6 100644
--- a/drivers/net/ethernet/8390/ne.c
+++ b/drivers/net/ethernet/8390/ne.c
@@ -166,6 +166,8 @@ bad_clone_list[] __initdata = {
#elif defined(CONFIG_PLAT_OAKS32R) || \
defined(CONFIG_MACH_TX49XX)
# define DCR_VAL 0x48 /* 8-bit mode */
+#elif defined(CONFIG_ATARI) /* 8-bit mode on Atari, normal on Q40 */
+# define DCR_VAL (MACH_IS_ATARI ? 0x48 : 0x49)
#else
# define DCR_VAL 0x49
#endif
--
1.7.0.4
--
To UNSUBSCRIBE, email to [email protected]
with a subject of "unsubscribe". Trouble? Contact [email protected]
Archive:
http://lists.debian.org/[email protected]
