On Tue, Mar 10, 2020 at 1:15 AM Geert Uytterhoeven <[email protected]> wrote: > > Hi Stefan, > > On Tue, Mar 10, 2020 at 4:06 AM Stefan Reinauer > <[email protected]> wrote: > > On Sun, Mar 8, 2020 at 3:43 AM Geert Uytterhoeven <[email protected]> > > wrote: > > > As well as trying to boot it with the BRP as primary memory (BRP first > > > in memfile) or sole memory (motherboard RAM disabled in memfile). > > > > With BigramPlus as sole memory the system can't seem to deal with the > > initramfs (see log) > > However, according to this log you have both enabled: > > > On node 0 totalpages: 4096 > > DMA zone: 40 pages used for memmap > > DMA zone: 0 pages reserved > > DMA zone: 4096 pages, LIFO batch:0 > > 16 MiB > > > On node 1 totalpages: 65536 > > DMA zone: 640 pages used for memmap > > DMA zone: 0 pages reserved > > DMA zone: 65536 pages, LIFO batch:15 > > 256 MiB > > > SLUB: Unable to allocate memory from node 0 > > SLUB: Allocating a useless per node structure in order to be able to > > continue > > SLUB: HWalign=16, Order=0-3, MinObjects=0, CPUs=1, Nodes=8 > > Probably the 16 MiB in the first chunk is too small to allocate > page tables from, especially if it contains the initramfs. > > What happens if you put the BRP first in the memfile?
Before chipram? --------------------------------- 0x50000000 268435456 2097152 --------------------------------- [ 0.000000] Linux version 5.4.0-4-m68k ([email protected]) (gcc version 9.2.1 20200203 (Debian 9.2.1-28)) #1 Debian 5.4) [ 0.000000] Amiga hardware found: [A4000] VIDEO BLITTER AUDIO FLOPPY A4000_IDE KEYBOARD MOUSE SERIAL PARALLEL A3000_CLK CHIP_RAM PAU [ 0.000000] initrd: 008517bf - 01000000 [ 0.000000] Built 2 zonelists, mobility grouping on. Total pages: 68952 [..] [ 53.910000] Run /init as init process [ 53.940000] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000004 [ 53.940000] CPU: 0 PID: 1 Comm: init Not tainted 5.4.0-4-m68k #1 Debian 5.4.19-1 [ 53.940000] Stack from 00821e38: [ 53.940000] 00821e38 00377373 0002c276 000000ff 00000001 400004d8 0081c000 00000004 [ 53.940000] 00820000 0000000c 00821ea4 0002db40 0036f405 00000004 00000004 00000001 [ 53.940000] 400004d8 0003477c 00032732 008272dc 00821f6c 00821f80 00828f60 00000000 [ 53.940000] 00000000 000000cd 00000000 008dc150 0002e182 00000004 00000003 000350fe [ 53.940000] 00000004 0000007c 00000000 00000000 00000000 00000001 00000000 00821fcc [ 53.940000] 00821f6c 00820000 00821fa4 008272a0 00002be2 00820007 000042f2 00821f6c [ 53.940000] Call Trace: [<0002c276>] panic+0xc4/0x296 [ 53.940000] [<0002db40>] do_exit+0x142/0x70e [ 53.940000] [<0003477c>] do_signal_stop+0x0/0x142 [ 53.940000] [<00032732>] __list_del_entry+0x0/0x24 [ 53.940000] [<0002e182>] do_group_exit+0x48/0x80 [ 53.940000] [<000350fe>] get_signal+0x124/0x490 [ 53.940000] [<00002be2>] do_IRQ+0x26/0x32 [ 53.940000] [<000042f2>] do_notify_resume+0x32/0x4d4 [ 53.940000] [<002e099e>] kernel_init+0x0/0xd2 [ 53.940000] [<00034fb4>] force_sig_fault_to_task+0x30/0x3c [ 53.940000] [<00002a64>] do_signal_return+0x10/0x1a [ 53.940000] [<002e099e>] kernel_init+0x0/0xd2 [ 53.940000] [<0000c000>] apollo_irq_eoi+0x10/0x24 [ 53.940000] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000004 ]--- This one works: --------------------------------- 2097152 0x50000000 268435456 0x07000000 16777216 --------------------------------- Same as only using the bigram (and I got into the OS just fine, but I had to do the installation through qemu) I also did some tests, and had Amiga Test Kit running over night, which couldn't find anything wrong with the onboard fast ram. Stefan > Thanks! > > Gr{oetje,eeting}s, > > Geert > > -- > Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- > [email protected] > > In personal conversations with technical people, I call myself a hacker. But > when I'm talking to journalists I just say "programmer" or something like > that. > -- Linus Torvalds
