Hi,
Have you tried running:
hdparm -tT /dev/sda
(or whatever the device id is)?
-Jason
Miroslav Maiksnar wrote:
Dne ne 4. září 2005 8:20 Jens Vogel napsal(a):
Hello Mike,
[EMAIL PROTECTED] wrote:
Is there a way to tell if my sata II drives are running
at sata II speed? (300 MB/s vs 150 MB/s?)
I don't know whether or not there is a way to tell that (maybe with
hdparm?).
But I don't think this matters much anyway.
These days _fast_ harddisks can deliver a sustained data rate of about
60MB/s, maybe with peaks of 80MB/s. So if you want to test the speed of
SATA-II you could try to create a RAID0 array with at least 3 fast
harddisks and see whether its data rate exeeds about 150MB/s.
Well, but even with SATA-I you get 3*150MB/s rate, so you won't discover
anything...
Try looking at your dmesg, there may be info about SATA speed upon controler
detection.
Mixi
.
|
- Re: am I running sata II ? Jason Hamilton
-
