A J Stiles wrote:
On Monday 19 February 2007 00:01, Lance Hoffmeyer wrote:
Hey all,
I have an old problem that I now wish to fix since I have just upgraded
my file server. I can boot the server from a floppy but when I try to
boot directly from the Hard Drive all I get is 01 01 01 01 ...
I have booted from the floppy and rerun lilo -v
OUTPUT:
Reading boot sector from /dev/hda1
Merging with /boot/boot-menu-b ...
I have checked and /dev/hda1 is bootable
in lilo.conf
boot = /dev/hda1
root = /dev/hda1
Just checked my lilo.conf on another machine (not my 64-bit one, which is
using grub) and this has:
boot=/dev/hda
root=/dev/hda3
(I've a small /boot partition and a swap partition in hda1 and hda2
respectively, so hda3 is the root partition).
I think you normally want lilo to install in the MBR, which would be /dev/hda
and not hda1. You only install lilo into an actual partition if you are
using it as a secondary bootstrap loader which gets called up by some other
bootstrap loader (such as Windows' NTLDR). If you're single-booting Debian
then you definitely want lilo installed in the MBR.
It's easy to fix; just boot from some other media, mount your usual drives
under some convenient mountpoint, chroot to there, run lilo and remember to
EXIT FROM THE CHROOT WITH CTRL+D before you reboot. (If you don't exit the
chroot, the changes you made could get lost.)
You also need to mount /dev and /proc in the chroot. Commands will look
something like this:
mkdir /mychroot/dev
mkdir /mychroot/proc
mount -o bind /dev /mychroot/dev
mount proc -t proc /mychroot/proc
Matt
