En/na Joakkinen ha escrit:
I haven´t a authentication problem. My network is completely open. No
Wep, no wpa, ... nothing :(
Wow!!
So I have no idea. Sorry Joakkinen, I can't help you
Xan
PS: Yes. I speak spanish (very well ;-))
You see this ...
wlan1: Initial auth_alg=0
wlan1: authenticate with AP 00:17:9a:f3:f6:03
wlan1: RX authentication from 00:17:9a:f3:f6:03 (alg=0 transaction=2
status=0)
wlan1: authenticated
wlan1: associate with AP 00:17:9a:f3:f6:03
wlan1: associate with AP 00:17:9a:f3:f6:03
wlan1: associate with AP 00:17:9a:f3:f6:03
wlan1: association with AP 00:17:9a:f3:f6:03 timed out
I saw with the utility modconf the modules available and there are
several cards that would have to be "plug and play". with the kernel
2.6.18-4-ixp4xx
Some of those is sold at the moment?
Thanks
p.d: [EMAIL PROTECTED]
Can you speak spanish? :)
El lun, 30-04-2007 a las 10:59 +0200, Xan escribió:
En/na Joakkinen ha escrit:
Hi,
I have a NSLU2 and I want to connect it to my wireless network. I have
several wireless cards based on the chip rt2570 or rt73. I compiled the
modules rt2570, and rt2x00 with module-assistant and put the firmware in
the directory /lib/firmware and the card seems that it works. I can
detect my access point (iwlist scan) but I can`t associated with it.
dmesg say this ...
Hi Joakkinen,
I'm not a developer. I'm just a desktop user.
I have too a rt2570 usb wifi and I'm planed to install it. I know that
it's could be done with modules but I did not see the rt2x00
documentation yet.
Can you pointing me what do you dit exactly for install it? I will thank
you very much
In reference to your question: if card seems that it works you have
_only_ an authentication problem. I think it's a simple problem.
Do you use any authentication method in access point: wep, wpa, ?
What device is your wifi: ra0, eth1, ...?
Perhaps I could help you (but I don't promise it ;-))
Regards,
Xan
wlan1: authentication with AP [ap mac] timed out
Now I am following these instructions ...
http://www.nslu2-linux.org/wiki/Peripherals/WirelessNetworkAdapter
(section rt73)
... but they seem complicated.
Another question.
Exists ndiswrapper for arm arquitecture?
Thanks.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
