Riku Voipio <riku.voipio <at> iki.fi> writes: > On Tue, May 22, 2007 at 02:11:59PM +0200, Marcus Better wrote: > > NET: Registered protocol family 17 > > XScale DSP coprocessor detected. > > x1205 0-006f: setting the system clock to 2007-05-22 12:03:58 (1179835438) > > Freeing init memory: 96K > > libgcc_s.so.1 must be installed for pthread_cancel to workKernel panic - not syncing: Attempted to kill init!
> Broken initramfs? Seems libgcc_s.so.1 does not end up in the initramfs on > arm with glibc 2.5. Should I file a bug report somewhere? nslu2-utils? Since the slug is now unbootable, I tried to modify and rebuild the initramfs using slugimage on another machine. Is there any solid documentation on this? I only found this: http://www.nslu2-linux.org/wiki/Debian/BuildImage I used these steps to rebuild the image: find . | cpio -o -H newc | gzip -9 > ../ramdisk-swap.gz dd if=ramdisk-swap.gz of=ramdisk-pad.gz ibs=4M conv=sync devio '<< ramdisk-pad.gz; xp $ 4' > ramdisk.gz After flashing the new initramfs with upslug it gets stuck at boot, see the attached output. Marcus ... Resetting.+Ethernet eth0: MAC address 00:13:10:d6:1b:1b IP: 192.168.0.1/255.255.255.0, Gateway: 192.168.0.1 Default server: 0.0.0.0, DNS server IP: 0.0.0.0 RedBoot(tm) bootstrap and debug environment [ROMRAM] Red Hat certified release, version 1.92 - built 15:16:07, Feb 3 2004 Platform: IXDP425 Development Platform (XScale) Copyright (C) 2000, 2001, 2002, Red Hat, Inc. RAM: 0x00000000-0x02000000, 0x000723a0-0x01ff3000 available FLASH: 0x50000000 - 0x50800000, 64 blocks of 0x00020000 bytes each. == Executing boot script in 2.000 seconds - enter ^C to abort RedBoot> boot;exec 0x01d00000 have eRcOmM copy kernel code from flash to RAM copy ramdisk file from flash to RAM run kernel Using base address 0x01d00000 and length 0x0001ffe0 APEX Boot Loader 1.4.15 -- Copyright (c) 2004,2005,2006,2007 Marc Singer APEX comes with ABSOLUTELY NO WARRANTY. It is free software and you are welcome to redistribute it under certain circumstances. For details, refer to the file COPYING in the program source. apex => mem:0x00200000+0xa78c (42892 bytes) env => nor:0x7c000+15k (no-write) Use the command 'help help' to get started. # copy -s $kernelsrc $bootaddr # copy -s fis://kernel 0x00008000 1310688 bytes transferred # copy -s $ramdisksrc $ramdiskaddr # copy -s fis://ramdisk 0x01000000 6422512 bytes transferred # wait 10 Type ^C key to cancel autoboot. Type ^C key to cancel autoboot. # boot ATAG_HEADER ATAG_MEM: start 0x00000000 size 0x02000000 ATAG_CMDLINE: (55 bytes) 'console=ttyS0,115200 rtc-x1205.probe=0,0x6f noirqdebug' ATAG_INITRD2: start 0x01000000 size 0x00400000 ATAG_END Booting kernel at 0x00008000... -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
