Hi , The new pogoplugV2 arrived today, all black ! model number POGO-E02 Logged in locally as root and ran killall hbwd, and then moved it while still powered up on to the network. Followed the directions on http://projects.doozan.com/debian/, I used gparted on the laptop to partition the new 8GB Sandisk Ultra flash drive. Did :- cd /tmp wget http://projects.doozan.com/debian/kirkwood.debian-wheezy.sh chmod +x kirkwood.debian-wheezy.sh export PATH=$PATH:/usr/sbin:/sbin ./kirkwood.debian-wheezy.sh All went well, got past the bit asking if I want to keep the pogoplug capability..no Then the install failed as it couldn't mount sda2 or sda1
df showed no /dev/sda anything So I tried another flash drive and used fdisk locally, but it couldn't find /dev/sda in /tmp ls showed that everything had downloaded and was in /tmp. Next power cyclyed and started it up on the local network , which has no access to the outside world. logged in as root. OK cd /tmp and ls showed the installer had gone , which is to be expected. ran df Pogoplug:/proc$ df Filesystem 1k-blocks Used Available Use% Mounted on /dev/mtdblock2 32768 12552 20216 38% / none 128004 4 128000 0% /tmp I've a flash stick in the front skt and the top on the back of it. They are not shown :( next step mkdir /tmp/fred Pogoplug:/tmp$ mount /dev/sda1 /tmp/fred Pogoplug:/tmp$ df Filesystem 1k-blocks Used Available Use% Mounted on /dev/mtdblock2 32768 12552 20216 38% / none 128004 4 128000 0% /tmp /dev/sda1 2015824 3000 1910424 0% /tmp/fred That is correct as the first partition was set at 2000MB It looks as if plugging in a USB mem stick does not auto mount. I noticed a directory in /tmp before I power cycled as debian, do I need to manually mount /dev/sda1 as /tmp/debian The othe install page I found was http://mehl.co/articles/installing_debian_on_the_pogoplug/ but wget failed to find meh1.co got invalid address. Is there any difference between the pink and grey pogoplug and the Black and clear I have, they are the same shape/ /proc/cpuinfo shows Pogoplug:/tmp$ cat /proc/cpuinfo Processor : ARM926EJ-S rev 1 (v5l) BogoMIPS : 1192.75 Features : swp half thumb fastmult edsp CPU implementer : 0x56 CPU architecture: 5TE CPU variant : 0x2 CPU part : 0x131 CPU revision : 1 Cache type : write-back Cache clean : cp15 c7 ops Cache lockdown : format C Cache format : Harvard I size : 16384 I assoc : 4 I line length : 32 I sets : 128 D size : 16384 D assoc : 4 D line length : 32 D sets : 128 Hardware : Feroceon-KW Revision : 0000 Serial : 0000000000000000 Any suggestions appreciated , In the mean time I'll try before running the kirkwood.......sh mounting /dev/sda1 as /tmp/debian -- -- Best wishes / 73 Richard Bown Email : [email protected] HTTP :http://www.g8jvm.info nil carborundum a illegitemis ################################################################################## Ham Call G8JVM . OS Fedora FC18 x86_64 on a Dell Inspiron N5030 laptop Maidenhead QRA: IO82SP38, LAT. 52 39.720' N LONG. 2 28.171 W ( degs+mins ) QRV VHF 6mtrs 200W, 4 mtrs 150W, 2mtrs 350W, 70cms 200W Microwave 23 cms 140W, 13 cms 100W, 6 cms 0W & 3cms 5W ################################################################################## Please do not use the e-mail address of [email protected] Mail hosted by 1and1, Domain screwed up by 1and1 and Freeparking -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected] Archive: http://lists.debian.org/[email protected]
