On Mon, 22 Apr 2013 15:22:57 +0100 Richard Bown <[email protected]> wrote:
> Hi , > The new pogoplugV2 arrived today, all black ! > model number POGO-E02 > Logged in locally as root and ran killall hbwd, and then moved it while still > powered up on to the > network. > Followed the directions on http://projects.doozan.com/debian/, I used gparted > on the laptop to > partition the new 8GB Sandisk Ultra flash drive. > Did :- > cd /tmp > wget http://projects.doozan.com/debian/kirkwood.debian-wheezy.sh > chmod +x > kirkwood.debian-wheezy.sh > export PATH=$PATH:/usr/sbin:/sbin > ./kirkwood.debian-wheezy.sh > All went well, got past the bit asking if I want to keep the pogoplug > capability..no > Then the install failed as it couldn't mount sda2 or sda1 > > df showed no /dev/sda anything > So I tried another flash drive and used fdisk locally, but it couldn't find > /dev/sda > in /tmp ls showed that everything had downloaded and was in /tmp. > Next power cyclyed and started it up on the local network , which has no > access to the outside > world. > logged in as root. OK > cd /tmp and ls showed the installer had gone , which is to be expected. > ran df > Pogoplug:/proc$ df > Filesystem 1k-blocks Used Available Use% Mounted on > /dev/mtdblock2 32768 12552 20216 38% / > none 128004 4 128000 0% /tmp > > I've a flash stick in the front skt and the top on the back of it. > They are not shown :( > next step > mkdir /tmp/fred > Pogoplug:/tmp$ mount /dev/sda1 /tmp/fred > Pogoplug:/tmp$ df > Filesystem 1k-blocks Used Available Use% Mounted on > /dev/mtdblock2 32768 12552 20216 38% / > none 128004 4 128000 0% /tmp > /dev/sda1 2015824 3000 1910424 0% /tmp/fred > > That is correct as the first partition was set at 2000MB > It looks as if plugging in a USB mem stick does not auto mount. > > I noticed a directory in /tmp before I power cycled as debian, do I need to > manually > mount /dev/sda1 as /tmp/debian > The othe install page I found was > http://mehl.co/articles/installing_debian_on_the_pogoplug/ > but wget failed to find meh1.co got invalid address. > Is there any difference between the pink and grey pogoplug and the Black and > clear I have, they > are the same shape/ > /proc/cpuinfo shows > Pogoplug:/tmp$ > cat /proc/cpuinfo Processor : ARM926EJ-S rev 1 (v5l) > BogoMIPS : 1192.75 > Features : swp half thumb fastmult edsp > CPU implementer : 0x56 > CPU architecture: 5TE > CPU variant : 0x2 > CPU part : 0x131 > CPU revision : 1 > Cache type : write-back > Cache clean : cp15 c7 ops > Cache lockdown : format C > Cache format : Harvard > I size : 16384 > I assoc : 4 > I line length : 32 > I sets : 128 > D size : 16384 > D assoc : 4 > D line length : 32 > D sets : 128 > > Hardware : Feroceon-KW > Revision : 0000 > Serial : 0000000000000000 > > Any suggestions appreciated , > In the mean time I'll try > before running the kirkwood.......sh mounting /dev/sda1 as /tmp/debian > > Just a bit more running the installer again without mount the mem stick manually # Installing /usr/share/debootstrap/pkgdetails... Connecting to download.doozan.com (50.116.34.13:80) pkgdetails.md5 100% |********************************************************************************| 32 --:--:-- ETA Connecting to download.doozan.com (50.116.34.13:80) pkgdetails 100% |********************************************************************************| 559k 00:00:00 ETA # Successfully installed /usr/share/debootstrap/pkgdetails. # Starting debootstrap installation E: unrecognized or invalid option --no-check-gpg debootstrap failed. See /tmp/debian/debootstrap/debootstrap.log for more information. Pogoplug:/tmp$ less /tmp/debian/debootstrap/debootstrap.log less: can't open '/tmp/debian/debootstrap/debootstrap.log': No such file or directory Pogoplug:/tmp$ ls debian install_uboot_mtd0.sh resolv.conf var debootstrap kirkwood.debian-wheezy.sh uboot-mtd0-dump Pogoplug:/tmp$ cd debootstrap/ Pogoplug:/tmp/debootstrap$ ls control.tar.gz data.tar.gz debian-binary debootstrap.deb usr Pogoplug:/tmp/debootstrap$ cd /tmp/debian Pogoplug:/tmp/debian$ ls lost+found Strange ?? -- -- Best wishes / 73 Richard Bown Email : [email protected] HTTP :http://www.g8jvm.info nil carborundum a illegitemis ################################################################################## Ham Call G8JVM . OS Fedora FC18 x86_64 on a Dell Inspiron N5030 laptop Maidenhead QRA: IO82SP38, LAT. 52 39.720' N LONG. 2 28.171 W ( degs+mins ) QRV VHF 6mtrs 200W, 4 mtrs 150W, 2mtrs 350W, 70cms 200W Microwave 23 cms 140W, 13 cms 100W, 6 cms 0W & 3cms 5W ################################################################################## Please do not use the e-mail address of [email protected] Mail hosted by 1and1, Domain screwed up by 1and1 and Freeparking -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected] Archive: http://lists.debian.org/[email protected]
