On Sun, 2013-05-19 at 18:49 +0100, Tixy wrote: > On Sat, 2013-05-18 at 11:40 +0100, Ian Campbell wrote: > > I do remember having problems with loose cables between the DP and the > > UART/JTAG module early on, but a firm reseating helped there. > > Well, what do you know... I thought I'd give this one last try, I took > my bricked plug out of its case, to get better access, rammed the > connectors home, then tried JTAG connection whilst pulling the cables in > different directions and after about 10 tries got a U-Boot loaded into > RAM :-) And I've successfully loaded and flashed the Debian U-Boot using > the instructions that everyone says works.
Excellent, I always thought those bundle-o-wires things were a bit dodgy looking... > Now all I need to do is get my soldering iron out. The separate SD card > board in the box had connectors which are glue in so I cut the cables, > thinking it was only for the internal micro SD (which I don't need) and > not realising it's needed for the external SD card as well. DOH! Doh Indeed! Ian. -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected] Archive: http://lists.debian.org/[email protected]
