Philippe Clérié <[email protected]> writes: > On 06/12/2013 05:01 PM, Philippe Clérié wrote: >> On 06/12/2013 09:27 AM, Martin Michlmayr wrote: >>> * Philippe Clérié <[email protected]> [2013-06-12 08:48]: >>>> Thanks. I tried loading at 0x0080 0x0110 with the following error: >>>> >>>> Wrong Ramdisk Image format >>>> Ramdisk image is corrupt or invalid. >>> >>> Can you post the full boot log? >>> >> >> I re-downloaded the images and tried again. This time I get the same as >> the previous kernel. Below is the log. >> >> U-Boot 2013.01.01 (May 10 2013 - 06:32:54) >> Marvell-DreamPlug >> >> SoC: Kirkwood 88F6281_A1 >> DRAM: 512 MiB >> WARNING: Caches not enabled >> SF: Detected MX25L1605D with page size 64 KiB, total 2 MiB >> In: serial >> Out: serial >> Err: serial >> Net: egiga0, egiga1 >> 88E1116 Initialized on egiga0 >> 88E1116 Initialized on egiga1 >> Hit any key to stop autoboot: 0 >> Marvell>> usb start >> (Re)start USB... >> USB0: USB EHCI 1.00 >> scanning bus 0 for devices... 5 USB Device(s) found >> scanning usb for storage devices... Device NOT ready >> Request Sense returned 02 3A 00 >> 3 Storage Device(s) found >> Marvell>> fatload usb 2:1 0x00800000 uImage >> reading uImage >> 1607552 bytes read in 128 ms (12 MiB/s) >> Marvell>> fatload usb 2:1 0x01100000 uInitrd >> reading uInitrd >> 4853363 bytes read in 254 ms (18.2 MiB/s) >> Marvell>> setenv bootargs console=/dev/ttyS0,115200n8
btw, might want to try with earlyprintk=ttyS0,115200 and see if there are more messages Arnaud -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected] Archive: http://lists.debian.org/[email protected]
