Le samedi 31 août 2013 à 10:59 +0100, Ian Campbell a écrit : > I downloaded: > ftp://ftp.uk.debian.org/debian/dists/wheezy/main/installer-armel/current/images/kirkwood/netboot/marvell/dreamplug/ > 7bc3332ed880606509511c7b4b439266 uImage > 6afad330c6d75296255782e79226c94a uInitrd
I confirm I used the exact same images (md5sum matches). > Did you select any non-default options as you went through the > installer? I have restarted the whole installation process, that I'll try to detail as much as possible in this email. As for u-boot: Marvell>> setenv serverip 192.168.0.129 Marvell>> setenv ipaddr 192.168.0.126 Marvell>> tftpboot 0x00800000 uImage Marvell>> tftpboot 0x01100000 uInitrd Marvell>> setenv bootargs console=ttyS0,115200n8 base-installer/initramfs-tools/driver-policy=most Marvell>> bootm 0x00800000 0x01100000 Then the installer starts. The first few questions are: Select a language: English Select your location: other: Europe: France Configure locales: en_US.UTF-8 Configure the network: eth0 (dhcp configuration succeeds) Hostname: gagarine Domain name: paulk.fr Choose a mirror of the Debian archive: France: ftp.fr.debian.org HTTP proxy: (blank) Then "Loading additional components" retrieves some installer components. I finally get to: Set up users and passwords: (root password) (user name) (user password) > Are you installing to internal or external MMC? Next, I get to "Partition disks" -- I use a manual layout because I don't want swap on the internal microsd card. In the end, it looks like this: SCSI1 (0,0,0) (sda) - 4.0 GB Generic STORAGE DEVICE > #1 primary 225.4 MB B F ext2 /boot > #2 primary 3.7 GB F ext2 / I confirm that I don't want swap and write changes to disk. It moves on to "Installing the base system", then I say no to popularity-contest and get to tasksel, where I select "SSH server" and "Standard system utilities". Then it goes up to "Making the system bootable" and hangs at "Installed u-boot-tools". Also, I checked that u-boot-tools has the same md5 from the mirror I use compared to what I get from another mirror. > When it hangs do you get a cancel or go back button which would allow > you to access the installer syslog? Perhaps if you force a reboot at > this point and boot in rescue mode (add "rescue/enable=true" to the > bootargs) then you can access the target rootfs and find the instller > logs in /var/log/installer? That is probably something that I can do. Worst case scenario, I restart the install in expert mode, enable ssh and get the logs when it hangs. > It shouldn't matter (if your kernel is booting you don't have the buggy > one), but which u-boot do you have? Mine reports: > U-Boot 2012.04.01 (Jun 01 2012 - 02:17:08) U-Boot 2012.04.01 (Jun 01 2012 - 02:17:08) here as well (that's the version from the debian packages on wheezy). Note that I also have a sheevaplug that I want to reinstall using Wheezy, so I'll go through the same steps (on an external sdcard though). I'll let you know if I encounter the same problem as what I got with the DreamPlug. -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected] Archive: http://lists.debian.org/[email protected]
