W dniu 27.10.2025 o 16:39, Rainer Dorsch pisze:
Hello,
has anybody by chance advise for running Debian 13 on the espressobin v5?
I was running OpenWRT on mine a few years ago. Wrote a blog post about
handling U-Boot build and update:
https://marcin.juszkiewicz.com.pl/2021/02/15/ebbr-on-espressobin/
Is u-boot potentially too old to work with a Debian 13 installer image?
This device is probably still supported in U-Boot so you should be able
to build current one. But you have Armbian one so I would expect it to
be able to boot Debian in some way.
Marvell>> version
U-Boot 2017.03-armada-18.09.1-ga92bd86-armbian (Sep 05 2018 - 21:49:34 +0200)
If yes, how would I update u-boot? The device supports a bubt command:
Marvell>> help bubt
bubt - Burn a u-boot image to flash
From my post above:
Marvell>> bubt flash-image.bin spi usb
Burning U-Boot image "flash-image.bin" from "usb" to "spi"
Bus usb@58000: Register 2000104 NbrPorts 2
Starting the controller
USB XHCI 1.00
Bus usb@5e000: USB EHCI 1.00
scanning bus usb@58000 for devices... 1 USB Device(s) found
scanning bus usb@5e000 for devices... 2 USB Device(s) found
Image checksum...OK!
SF: Detected is25wp032 with page size 256 Bytes, erase size 4 KiB, total
4 MiB
Erasing 991232 bytes (242 blocks) at offset 0 ...Done!
Writing 990944 bytes from 0x6000000 to offset 0 ...Done!
