Hello
You can also test the I pot without flashing and for recouvert with lavoir toilette.
You may find some advices on the blog CyberMind.fR which will soon been enhanced with édition and mocchabin.
Cheers
Le mar. 28 oct. 2025 à 03:01, Alan Corey <[email protected]> a écrit :
Learn to read error messages. The poor thing has no idea what ext4ls is. It could be a missing header or library._________________________
Life will be better once the Republicans move to Mars.
_________________________
FIRE TRUMP!
On Mon, Oct 27, 2025, 6:49 PM Marcin Juszkiewicz <[email protected]> wrote:W dniu 27.10.2025 o 16:39, Rainer Dorsch pisze:
> Hello,
>
> has anybody by chance advise for running Debian 13 on the espressobin v5?
I was running OpenWRT on mine a few years ago. Wrote a blog post about
handling U-Boot build and update:
https://marcin.juszkiewicz.com.pl/2021/02/15/ebbr-on-espressobin/
> Is u-boot potentially too old to work with a Debian 13 installer image?
This device is probably still supported in U-Boot so you should be able
to build current one. But you have Armbian one so I would expect it to
be able to boot Debian in some way.
> Marvell>> version
>
> U-Boot 2017.03-armada-18.09.1-ga92bd86-armbian (Sep 05 2018 - 21:49:34 +0200)
> If yes, how would I update u-boot? The device supports a bubt command:
>
> Marvell>> help bubt
> bubt - Burn a u-boot image to flash
From my post above:
Marvell>> bubt flash-image.bin spi usb
Burning U-Boot image "flash-image.bin" from "usb" to "spi"
Bus usb@58000: Register 2000104 NbrPorts 2
Starting the controller
USB XHCI 1.00
Bus usb@5e000: USB EHCI 1.00
scanning bus usb@58000 for devices... 1 USB Device(s) found
scanning bus usb@5e000 for devices... 2 USB Device(s) found
Image checksum...OK!
SF: Detected is25wp032 with page size 256 Bytes, erase size 4 KiB, total
4 MiB
Erasing 991232 bytes (242 blocks) at offset 0 ...Done!
Writing 990944 bytes from 0x6000000 to offset 0 ...Done!
