Newbie to debian, but not to linux, I want (in order to be "full" GPL) to install debian on a server. The SCSI RAID controler I use (DPT, module dpt_io.o) is not recognized. how can I do a custom set of resuce/boot/disk in order to install debian on my system. All is working fine with RedHat and 2.2.16 kernel (DPT sent me the kernel patch to add the SCSI controler drivers). I hae the source for the driver, but I don't succeed to do a good rescue/boot pair of disk to make it work with debian. My system is working fine with RedHat. I want to replace red hat by debian Step by step I did the following : 1) copy the working kernel image on the rescue disk (compact flavor) 2) make a modules.tgz from /lib/modules/2.2.16, coyp it to the rescue disk 3)on the rescue disk : rdev.sh 4)reboot on the rescue disk, type enter at the prompt, inserting the boot disk when asked my scsi controler is not found and I can't follow the install process. moreover my ethernet card is not seen neither (via-rhine.o module, a D-Link 100 Mhz etehrnet card - works like a charm with red hat install) If someone could help me to find a correct way to install debian on my system, I'll be very pleased :)
begin:vcard n:Conduch�;Christophe tel;cell:06 61 98 31 67 tel;fax:+33 (0)5.65.35.04.06 tel;work:+33 (0)5.65.35.04.04 x-mozilla-html:FALSE url:http://www.apm-online.com org:APM-Online adr:;;125, rue Mar�chal Foch;Cahors;;46000;France version:2.1 email;internet:[EMAIL PROTECTED] title:Directeur Associ� x-mozilla-cpt:;-16608 fn:Christophe Conduch� end:vcard
