Hi Jim,
take a look at the customized boot disks by Kevin Trass
(http://www.merilus.com/~kevin/aacraid.html) and Mr. Nokubi
(http://www.eal.or.jp/~nokubi/aacraid-disk/).
They might work for you. I haven't been able to install 2.2rev2 on a DELL PowerEdge
4400 with a PERC2 4-channel RAID adapter because either set of bootdisks crashes with
a kernel panic when trying to do a "mkfs" on the newly partitioned RAID5 container.
My situation is comparable to yours. I reverted to RedHat due to my inability to
install Debian on the 4400. Unfortunately, I was also not successful in creating my
own boot disks so that I rely on someone putting the drivers in the boot images.
As far as I know, my PERC2 needs the aacraid driver from Adaptec. Older PERC
controller and, IMHO, the PERC-2DC models are based on an AMI Megatrends chipset and
therefore require the megaraid driver.
A possible cause for the crash might be the onboard AIC7899 and AIC7880 controllers
where only the latter is used for a SCSI CD-ROM in my system.
I can forward you a bunch of emails about this problem if you want.
Stefan
> -----Original Message-----
> From: Miller, Jim [mailto:[EMAIL PROTECTED]]
> Sent: Thursday, January 18, 2001 11:05 PM
> To: '[EMAIL PROTECTED]'
> Subject: Problem with SCSI adapters
>
>
> I am trying to load a dell server 4400 poweredge with 2.2 Rev2.
>
> Hardware raid array is the problem.
>
> The built in Perc3 card doesn't get a driver. Dell distributes a RedHat
> driver disk for the install..Can I make this work with Debian?
> There is also an RPM with the driver on it.
>
> I have also plugged in another Perc 2 card I believe it is AMI
> Series 467 2
> channel. When the kernel boots I get a megaraid driver for this card that
> freezes. The last line is
>
> SCSI2 : Found a megaraid controller at 0xfc804008, IRQ: 14
>
> HELP!!! I would love to get either card working. If not I will
> have to turn
> to RedHat. Personal preference is Debian and I was trying to keep it that
> way :-)
>
> /********************************************************************
> * Jim Miller
> *
> * Analyst/ Programmer *
> * Novoste Corporation
> *
> * [EMAIL PROTECTED]
> *
> * (770)810-3219
> *
> * Round the Firewall, Out the modem, Through the router, *
> * Down the wire, NOTHIN BUT NET!! *
> **********************************************************************/
>
> "Pursuant to US Code, Title 47, Chapter 5, Subchapter II, '227,
> any and all
> unsolicited commercial E-mail sent to this address
> is subject to a download and archival fee in the amount of $500 US.
> E-mailing denotes acceptance of these terms."
>
>
>
> --
> To UNSUBSCRIBE, email to [EMAIL PROTECTED]
> with a subject of "unsubscribe". Trouble? Contact
> [EMAIL PROTECTED]
>
>
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
