Trying to install 2.2r2 on an intel i486 dx2 (80486-dx2-s) machine, (clone
- DTK Computer), 6mhz, 24MB RAM, 428 MB HDD (Segate ST3491A), Award Bios
v4.50g (10). Have the CD ROM set - fails on executing boot.bat from the CD
ROM but it dies after:
hda: ST3491A-XR, ATA DISK drive
hdb: FX4820T, ATAPI CDROM drive
Unable to handle kernel paging request at virtual address c1fffff9........
...
...
Aiee, killing interrupt handler
Did not expect it to load smoothly from CD.
So I tired using a boot disk (got disk image from your site and tried image
from CD) and it is ok...until...
hda: ST3491A-XR, ATA DISK drive
Unable to handle kernel NULL pointer dereference at virtual address 00000000
current->tss.cr3 = 00101000, %cr3 = 00101000
*pde = 00000000
Oops: 0000
CPU: 0
EIP: 0010:[<c03b779f>]
EFLAGS:00010286
eax: 00000000 ebx: c032528c ecx: c0325270 edx: 123401f7
esi: 00000000 edi: c0325270 ebp: c032539d esp: c17fbf68
ds: 0018 es: 0018 ss: 0018
Process swapper (pid: 1, process nr: 1; stackpage=c17fb000)
Stack: 00000000 00000001 c17fbfb0 00000000 00000282 00000282 00000246 c019312e
c0325270 00000f00 00000001 c031d6e8 00000001 00000001 00000001 00000001
00000001 00000001 c02dcbda c02dcc00 c02dc465 c010600 c02dccaa 00000f00
Call Trace: [<c019312e>] [<c0106000>] [<c0106000>] [<c0100018>]
[<c010615f>] [<c
0108c17>]
Code: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
And that is where she hangs. I looked at the help files and there did not
seem to be any that were applicable - though I did try no387 (its an old
machine) but it made no diff. Do we have a memory problem?
Any suggestions would be appreciated. Really want to make it work!
Chris Ridley
[EMAIL PROTECTED]
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
