Your message dated Thu, 15 Jan 2009 06:55:47 +0100
with message-id <[email protected]>
and subject line Re: Bug#511208: Installation-reports
has caused the Debian Bug report #511208,
regarding Installation-reports
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact [email protected]
immediately.)


-- 
511208: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=511208
Debian Bug Tracking System
Contact [email protected] with problems
--- Begin Message ---
Package: installation-reports

Boot method: CD
Image version: http://cdimage.debian.org/cdimage/lenny_di_rc1/i386/jigdo-cd/
Date: Saturday January 3rd, 2009

Machine: Airis 686
Processor:2x Intel Pentium 4/2600MHz
Memory: 768 MBytes
Partitions:
 Filesystem    Type   1K-blocks      Used Available Use% Mounted on
/dev/hdb1     ext3   113141448   2192560 105201636   3% /
tmpfs        tmpfs      387972         0    387972   0% /lib/init/rw
udev         tmpfs       10240       104     10136   2% /dev
tmpfs        tmpfs      387972         0    387972   0% /dev/shm


Output of lspci -knn (or lspci -nn):

00:00.0 Host bridge [0600]: Silicon Integrated Systems [SiS] 645xx [1039:0648] 
(rev 50)
        Kernel driver in use: agpgart-sis
        Kernel modules: sis-agp
00:01.0 PCI bridge [0604]: Silicon Integrated Systems [SiS] SiS AGP Port 
(virtual PCI-to-PCI bridge) [1039:0003]
        Kernel modules: shpchp
00:02.0 ISA bridge [0601]: Silicon Integrated Systems [SiS] SiS963 [MuTIOL 
Media IO] [1039:0963] (rev 25)
00:02.1 SMBus [0c05]: Silicon Integrated Systems [SiS] SiS961/2 SMBus 
Controller [1039:0016]
        Kernel driver in use: sis96x_smbus
        Kernel modules: i2c-sis96x
00:02.5 IDE interface [0101]: Silicon Integrated Systems [SiS] 5513 [IDE] 
[1039:5513]
        Kernel driver in use: SIS_IDE
        Kernel modules: sis5513
00:02.7 Multimedia audio controller [0401]: Silicon Integrated Systems [SiS] 
AC'97 Sound Controller [1039:7012] (rev a0)
        Kernel driver in use: Intel ICH
        Kernel modules: snd-intel8x0
00:03.0 USB Controller [0c03]: Silicon Integrated Systems [SiS] USB 1.1 
Controller [1039:7001] (rev 0f)
        Kernel driver in use: ohci_hcd
        Kernel modules: ohci-hcd
00:03.1 USB Controller [0c03]: Silicon Integrated Systems [SiS] USB 1.1 
Controller [1039:7001] (rev 0f)
        Kernel driver in use: ohci_hcd
        Kernel modules: ohci-hcd
00:03.3 USB Controller [0c03]: Silicon Integrated Systems [SiS] USB 2.0 
Controller [1039:7002]
        Kernel driver in use: ehci_hcd
        Kernel modules: ehci-hcd
00:04.0 Ethernet controller [0200]: Silicon Integrated Systems [SiS] SiS900 PCI 
Fast Ethernet [1039:0900] (rev 91)
        Kernel driver in use: sis900
        Kernel modules: sis900
00:0b.0 Modem [0703]: ALi Corporation SmartLink SmartPCI561 56K Modem 
[10b9:5459]
        Kernel driver in use: serial
01:00.0 VGA compatible controller [0300]: nVidia Corporation NV34 [GeForce FX 
5200] [10de:0322] (rev a1)
        Kernel modules: nvidiafb


Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Initial boot:           [O]
Detect network card:    [O]
Configure network:      [O]
Detect CD:              [O]
Load installer modules: [O]
Detect hard drives:     [O]
Partition hard drives:  [O]
Install base system:    [O]
Clock/timezone setup:   [O]
User/password setup:    [O]
Install tasks:          [O]
Install boot loader:    [O]
Overall install:        [O]

Comments/Problems:

Everything worked just fine. I think the installer (text-mode, not graphical) 
did a great job. I installed Lenny on a slave drive and it detected Etch on the 
master drive without problems.
My impression was that the process was faster than on other occasions. In short 
I'll try installing it on my laptop. I'll report. Congratulations!!!




--- End Message ---
--- Begin Message ---
Quoting chals ([email protected]):

> 
> Everything worked just fine. I think the installer (text-mode, not graphical) 
> did a great job. I installed Lenny on a slave drive and it detected Etch on 
> the master drive without problems.
> My impression was that the process was faster than on other occasions. In 
> short I'll try installing it on my laptop. I'll report. Congratulations!!!
> 


Given that your installation was a complete success, I do as
usual with reports for successful installations: I close the bug..:-)

This does not of course mean you weren't right to report. Knowing the
installations are correct is important for the d-i team.

Many thanks for your time testing the Debian Installer and reporting
your results. Have fun with your new Debian system!


Attachment: signature.asc
Description: Digital signature


--- End Message ---

Reply via email to