Your message dated Sat, 9 May 2009 08:46:47 +0200
with message-id <[email protected]>
and subject line Re: Bug#527612: installation-reports
has caused the Debian Bug report #527612,
regarding installation-reports
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact [email protected]
immediately.)
--
527612: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=527612
Debian Bug Tracking System
Contact [email protected] with problems
--- Begin Message ---
Package: installation-reports
Boot method: small-CD netinst
Image version:
http://cdimage.debian.org/debian-cd/5.0.1/i386/iso-cd/debian-501-i386-netinst.iso
Date: Fri May 8 18:08:54 JST 2009
Machine: Hitachi PC-7NH04
Processor: Pentium II (260 MHz ?)
Memory: (256+32) MB
Partitions:
debian81:/home/hideo# df -Tl
Filesystem Type 1K-blocks Used Available Use% Mounted on
/dev/hda1 ext3 3707984 3444412 75212 98% /
tmpfs tmpfs 144384 0 144384 0% /lib/init/rw
udev tmpfs 10240 80 10160 1% /dev
tmpfs tmpfs 144384 0 144384 0% /dev/shm
Output of lspci -nn and lspci -vnn:
debian81:/home/hideo# lspci -nn
00:00.0 Host bridge [0600]: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host
bridge (AGP disabled) [8086:7192] (rev 02)
00:02.0 VGA compatible controller [0300]: Chips and Technologies F65555 HiQVPro
[102c:00e5] (rev c6)
00:07.0 Bridge [0680]: Intel Corporation 82371AB/EB/MB PIIX4 ISA [8086:7110]
(rev 02)
00:07.1 IDE interface [0101]: Intel Corporation 82371AB/EB/MB PIIX4 IDE
[8086:7111] (rev 01)
00:07.2 USB Controller [0c03]: Intel Corporation 82371AB/EB/MB PIIX4 USB
[8086:7112] (rev 01)
00:07.3 Bridge [0680]: Intel Corporation 82371AB/EB/MB PIIX4 ACPI [8086:7113]
(rev 02)
00:0a.0 CardBus bridge [0607]: Texas Instruments PCI1220 [104c:ac17] (rev 02)
00:0a.1 CardBus bridge [0607]: Texas Instruments PCI1220 [104c:ac17] (rev 02)
00:0b.0 Ethernet controller [0200]: Digital Equipment Corporation DECchip
21142/43 [1011:0019] (rev 41)
00:0c.0 Multimedia audio controller [0401]: ESS Technology ES1978 Maestro 2E
[125d:1978]
debian81:/home/hideo# lspci -vnn
00:00.0 Host bridge [0600]: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host
bridge (AGP disabled) [8086:7192] (rev 02)
Flags: bus master, medium devsel, latency 64
Memory at <unassigned> (32-bit, prefetchable)
00:02.0 VGA compatible controller [0300]: Chips and Technologies F65555 HiQVPro
[102c:00e5] (rev c6) (prog-if 00 [VGA controller])
Subsystem: Chips and Technologies F65555 HiQVPro [102c:00e5]
Flags: stepping, medium devsel
Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
[virtual] Expansion ROM at 30000000 [disabled] [size=256K]
00:07.0 Bridge [0680]: Intel Corporation 82371AB/EB/MB PIIX4 ISA [8086:7110]
(rev 02)
Flags: bus master, medium devsel, latency 0
00:07.1 IDE interface [0101]: Intel Corporation 82371AB/EB/MB PIIX4 IDE
[8086:7111] (rev 01) (prog-if 80 [Master])
Flags: bus master, medium devsel, latency 64
[virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled]
[size=8]
[virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled]
[size=1]
[virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled]
[size=8]
[virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled]
[size=1]
I/O ports at fcf0 [size=16]
Kernel driver in use: PIIX_IDE
Kernel modules: piix
00:07.2 USB Controller [0c03]: Intel Corporation 82371AB/EB/MB PIIX4 USB
[8086:7112] (rev 01) (prog-if 00 [UHCI])
Flags: bus master, medium devsel, latency 64, IRQ 10
I/O ports at fcc0 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:07.3 Bridge [0680]: Intel Corporation 82371AB/EB/MB PIIX4 ACPI [8086:7113]
(rev 02)
Flags: medium devsel, IRQ 9
Kernel driver in use: piix4_smbus
Kernel modules: i2c-piix4
00:0a.0 CardBus bridge [0607]: Texas Instruments PCI1220 [104c:ac17] (rev 02)
Flags: bus master, medium devsel, latency 168, IRQ 11
Memory at 30080000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=01, subordinate=04, sec-latency=176
Memory window 0: 20000000-23fff000 (prefetchable)
Memory window 1: 24000000-27fff000
I/O window 0: 00001000-000010ff
I/O window 1: 00001400-000014ff
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
Kernel modules: yenta_socket
00:0a.1 CardBus bridge [0607]: Texas Instruments PCI1220 [104c:ac17] (rev 02)
Flags: bus master, medium devsel, latency 168, IRQ 11
Memory at 30081000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=05, subordinate=08, sec-latency=176
Memory window 0: 28000000-2bfff000 (prefetchable)
Memory window 1: 2c000000-2ffff000
I/O window 0: 00001800-000018ff
I/O window 1: 00001c00-00001cff
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
Kernel modules: yenta_socket
00:0b.0 Ethernet controller [0200]: Digital Equipment Corporation DECchip
21142/43 [1011:0019] (rev 41)
Subsystem: Hitachi, Ltd Device [1054:0104]
Flags: bus master, medium devsel, latency 165, IRQ 11
I/O ports at fc00 [size=128]
Memory at fedffc00 (32-bit, non-prefetchable) [size=1K]
[virtual] Expansion ROM at 30040000 [disabled] [size=256K]
Capabilities: [dc] Power Management version 1
Kernel driver in use: tulip
Kernel modules: tulip
00:0c.0 Multimedia audio controller [0401]: ESS Technology ES1978 Maestro 2E
[125d:1978]
Subsystem: ESS Technology ES1978 Maestro 2E [125d:1978]
Flags: bus master, medium devsel, latency 64, IRQ 11
I/O ports at f800 [size=256]
Capabilities: [c0] Power Management version 2
Kernel driver in use: ES1968 (ESS Maestro)
Kernel modules: snd-es1968, radio-maestro
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [O ]
Detect network card: [O ]
Configure network: [O ]
Detect CD: [O ]
Load installer modules: [O ]
Detect hard drives: [O ]
Partition hard drives: [O ]
Install base system: [O ]
Clock/timezone setup: [O ]
User/password setup: [O ]
Install tasks: [O ]
Install boot loader: [O ]
Overall install: [E ]
Comments/Problems:
I appreciate your job. Excellent!
Resolved Problems:
1. Detection vga resolution of X11
Initially, at Xorg.0.log
(II) CHIPS(0): Configured Monitor: Using hsync range of 31.50-37.90 kHz
(II) CHIPS(0): Configured Monitor: Using vrefresh range of 50.00-70.00 Hz
**** Where do the above values come from?
# Configuration file for svgalib. Default location is /etc/vga.
# Typical Horizontal sync ranges
# (Consult your monitor manual for Vertical sync ranges)
#
HorizSync 31.5 35.5
VertRefresh 50 90
**** My solution method is the following.
# xorg.conf (X.Org X Window System server configuration file)
#
#
Section "Monitor"
Identifier "Configured Monitor"
HorizSync 30.0 - 75.0
VertRefresh 50.0 - 86.0
Option "dpms"
EndSection
Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
DefaultDepth 16
Subsection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubsection
EndSection
===================================
Residual Problems: (I need your help.)
REBOOT is always fail.
The "shutdown" command is always success but the Power of PC is not turned OFF.
ACPI does not work.?
debian81:/etc/X11# acpid -d
acpid: can't open /proc/acpi/event: No such file or directory
debian81:/etc/X11# less /var/log/dmesg
[ 0.000000] ACPI Error (tbxfroot-0218): A valid RSDP was not found [20080321]
[ 0.132008] ACPI: Core revision 20080321
[ 0.132008] ACPI Exception (tbxface-0629): AE_NO_ACPI_TABLES, While loading
namespace from ACPI tables [20080321]
[ 0.132088] ACPI: Unable to load the System Description Tables
[ 0.132403] weird, boot CPU (#0) not listedby the BIOS.
[ 0.132425] SMP motherboard not detected.
[ 0.132444] Local APIC not detected. Using dummy APIC emulation.
[ 0.132460] SMP disabled
[ 0.132931] Brought up 1 CPUs
[ 0.132955] Total of 1 processors activated (536.13 BogoMIPS).
[ 0.133008] CPU0 attaching sched-domain:
[ 0.133029] domain 0: span 0
[ 0.133047] groups: 0
[ 0.134690] net_namespace: 660 bytes
[ 0.134750] Booting paravirtualized kernel on bare hardware
[ 0.136830] NET: Registered protocol family 16
[ 0.155640] PCI: PCI BIOS revision 2.10 entry at 0xfd9e4, last bus=0
[ 0.155666] PCI: Using configuration type 1 for base access
[ 0.155759] Setting up standard PCI resources
[ 0.166465] ACPI: Interpreter disabled.
[ 0.166494] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.166838] pnp: PnP ACPI: disabled
[ 0.166866] PnPBIOS: Scanning system for PnP BIOS support...
[ 0.166961] PnPBIOS: Found PnP BIOS installation structure at 0xc00f6150
Please let me know how to resolve.
Thank you.
--- End Message ---
--- Begin Message ---
Quoting hideo ohnuki ([email protected]):
> Comments/Problems:
> I appreciate your job. Excellent!
Given that your installation was a complete success, I do as
usual with reports for successful installations: I close the bug..:-)
This does not of course mean you weren't right to report. Knowing the
installations are correct is important for the d-i team.
Many thanks for your time testing the Debian Installer and reporting
your results. Have fun with your new Debian system!
signature.asc
Description: Digital signature
--- End Message ---
